Home › Engine / Hybrid System › 2GR-FKS (ENGINE MECHANICAL) › ENGINE UNIT
NM33A0E _51 Engine / Hybrid System _067497 2GR-FKS ENGINE MECHANICAL _0329780 ENGINE UNIT DE DETAILS F

2GR-FKS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

Nutless-type plastic region tightening bolts are used on the connecting rod sub-assemblies for a lighter design.


d.

Aluminum bearings are used for the connecting rod bearings.


e.

The connecting rod bearings are reduced in width to reduce friction.


f.

A solid lubrication overlay is used inside the connecting rod bearing to ensure reliability and friction reduction.

W129340C01
2.667,2.583 3,2.667 3,2.667 3.25,2.667 true 5.083,1.583 5.417,1.167 5.417,1.167 5.583,1.167 true 4.917,2.5 5.333,2.667 5.333,2.667 5.583,2.667 true 3.281,2.563 3.594,2.719 0.313,0.156 10 false *1 5.594,1.073 5.906,1.229 0.313,0.156 10 false *2 5.604,2.552 5.917,2.75 0.313,0.198 10 false *2
*1 Plastic Region Tightening Bolt *2 Connecting Rod Bearing