Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL SYSTEM
NM33A0E _51 Engine / Hybrid System _067498 2GR-FKS FUEL _0329796 FUEL SYSTEM DE DETAILS F

2GR-FKS FUEL  FUEL SYSTEM  DETAILS  FUEL DELIVERY PIPE (FOR DIRECT INJECTION)  


CONSTRUCTION


a.

A forged iron fuel delivery pipe assembly (for direction injection) is used.


b.

A fuel pressure sensor is installed to the fuel delivery pipe assembly (for direct injection).


c.

A nozzle holder clamp is used for the installation area of the fuel injector assembly (for direct injection). The nozzle holder clamp constantly pushes the fuel injector assembly (for direct injection) by the force of the spring to prevent the fuel injector assembly (for direct injection) from moving when fuel pressure is applied to the fuel injector assembly (for direct injection) while starting the engine with low fuel pressure. As a result, vibration and noise are reduced while at the same time airtightness is increased.


d.

A metal touch taper seal is used for the fuel pressure sensor and fuel pipe (for high pressure) fastener.

W138231C01
1.167,0.417 2.25,0.417 true 1.167,1 2.083,1 true 1.167,1.667 2.167,1.667 true 1.167,2.417 1.917,2.417 true 3.833,3.583 4.167,3.583 4.167,3.583 4.583,2.583 true 5.146,2.167 5.396,2 5.396,2 5.646,2 true 5.25,1.583 5.667,1.333 5.667,1.333 5.917,1.333 true 0.99,0.313 1.167,0.521 0.177,0.208 10 false *1 0.99,0.896 1.188,1.094 0.198,0.198 10 false *2 1,1.563 1.177,1.75 0.177,0.188 10 false *3 0.979,2.323 1.167,2.51 0.188,0.188 10 false *4 3.656,3.479 3.844,3.677 0.188,0.198 10 false *5 5.688,1.917 5.875,2.125 0.188,0.208 10 false *6 5.948,1.229 6.146,1.417 0.198,0.188 10 false *7
*1 Fuel Delivery Pipe RH (for Direct Injection) *2 Fuel Delivery Pipe with Sensor Assembly LH (for Direct Injection)
*3 Nozzle Holder Clamp *4 Fuel Injector Assembly (for Direct Injection)
*5 Fuel Pressure Sensor *6 No. 2 Fuel Pipe Sub-assembly (for High Pressure)
*7 No. 1 Fuel Pipe Sub-assembly (for High Pressure) - -