Home › Engine / Hybrid System › 2AR-FE (ENGINE CONTROL) › SFI SYSTEM › 2017.09–2021.02
NM33A0E _51 Engine / Hybrid System _067506 2AR-FE ENGINE CONTROL _0330023 SFI SYSTEM CO CONTROL F

2AR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The Dual Variable Valve Timing-intelligent (VVT-i) system is designed to control the intake and exhaust camshafts within a range of 35° respectively (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating conditions. This improves torque in all speed ranges as well as increasing fuel economy, and reducing exhaust emissions.

W126630C01
0.688,1.458 1.302,1.458 true 1.76,1.635 2.115,1.167 2.115,1.167 2.302,1.167 true 2.854,0.823 3.01,0.823 3.01,0.823 3.406,1.052 true 3.938,1.323 4.313,1.323 true 4.073,2.042 4.073,2.396 true 0.646,3.354 0.813,3.354 0.813,3.354 1.042,3.74 true 0.479,1.354 0.708,1.563 0.229,0.208 10 false *1 2.344,1.073 2.552,1.26 0.208,0.188 10 false *2 2.667,0.729 2.885,0.906 0.219,0.177 10 false *3 4.354,1.24 4.583,1.438 0.229,0.198 10 false *4 4.021,2.417 4.208,2.615 0.188,0.198 10 false *5 5.375,2.281 5.573,2.469 0.198,0.188 10 false *6 0.458,3.26 0.677,3.458 0.219,0.198 10 false *7 5.5,3.5 5.708,3.729 0.208,0.229 10 false *8 6.573,3.531 6.792,3.729 0.219,0.198 10 false *9
*1 Camshaft Timing Oil Control Valve Assembly (Intake) *2 Camshaft Timing Oil Control Valve Assembly (Exhaust)
*3 Camshaft Position Sensor (Intake) *4 Camshaft Position Sensor (Exhaust)
*5 Engine Coolant Temperature Sensor *6 ECM
*7 Crank Position Sensor *8 Mass Air Flow Meter Sub-assembly
*9 Throttle Position Sensor - -



b.

The dual VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below.

1.

During Idling

W110947E01
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Eliminating overlap reduces blow back to the intake side.
·

Stabilized idle speed

·

Better fuel economy



2.

At Light Load

W110948E01
0.49,0.083 1.698,0.427 1.208,0.344 10 : Intake 0.469,0.427 1.167,0.729 0.698,0.302 10 : Exhaust 1.458,0.208 3.177,0.604 1.719,0.396 10 To Advance Side (Exhaust) 4.063,0.208 5.573,0.542 1.51,0.333 10 To Retard Side (Intake) 3.438,0.021 3.896,0.219 0.458,0.198 10 TDC 3.479,1.542 3.938,1.74 0.458,0.198 10 BDC

Objective Effect
Eliminating overlap reduces blow back to the intake side. Ensured engine stability

3.

At Medium Load

W110949E01
0.469,0.083 1.594,0.406 1.125,0.323 10 : Intake 0.469,0.438 1.24,0.771 0.771,0.333 10 : Exhaust 1.604,0.167 3.167,0.573 1.563,0.406 10 To Advance Side (Intake) 4.094,0.188 5.708,0.573 1.615,0.385 10 To Retard Side (Exhaust) 3.469,0.021 3.927,0.219 0.458,0.198 10 TDC 3.49,1.542 3.948,1.74 0.458,0.198 10 BDC

Objective Effect
Increasing overlap increases internal EGR to reduce pumping losses.
·

Better fuel economy

·

Improved emission control



4.

In Low to Medium Speed Range with Heavy Load

W110950E01
0.479,0.073 1.458,0.417 0.979,0.344 10 : Intake 0.479,0.438 1.156,0.813 0.677,0.375 10 : Exhaust 1.594,1.208 3.219,1.594 1.625,0.385 10 To Retard Side (Exhaust) 4.021,1.271 5.635,1.708 1.615,0.438 10 To Advance Side (Intake) 3.458,0.083 3.917,0.281 0.458,0.198 10 TDC 3.458,1.583 3.917,1.75 0.458,0.167 10 BDC

Objective Effect
Advancing the intake valve closing timing improves volumetric efficiency. Improved torque in low to medium speed range

5.

In High Speed Range with Heavy Load

W110951E01
0.479,0.094 1.615,0.427 1.135,0.333 10 : Intake 0.469,0.438 1.208,0.792 0.74,0.354 10 : Exhaust 1.781,1.333 3.219,1.708 1.438,0.375 10 To Retard Side (Intake) 3.958,1.365 5.688,1.719 1.729,0.354 10 To Advance Side (Exhaust) 3.458,0.073 3.917,0.271 0.458,0.198 10 TDC 3.458,1.615 3.906,1.76 0.448,0.146 10 BDC

Objective Effect
Retarding the intake valve closing timing improves volumetric efficiency. Improved output

6.

At Low Temperatures

W110947E01
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Eliminating overlap reduces blow back to the intake side to stabilize the idle speed during fast idle.
·

Stabilized fast idle speed

·

Better fuel economy



7.

Starting the Engine/Stopping the Engine

W110947E01
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Eliminating overlap reduces blow back to the intake side. Improved startability