Home › Engine / Hybrid System › 2AR-FE (ENGINE CONTROL) › SFI SYSTEM › 2017.09–2021.02
NM33A0E _51 Engine / Hybrid System _067506 2AR-FE ENGINE CONTROL _0330023 SFI SYSTEM DE DETAILS F

2AR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  STARTER CONTROL (CRANKING HOLD FUNCTION)  


OPERATION


a.

When the engine switch is pressed with the brake pedal depressed and the shift lever in P or N, this function operates the starter until the engine starts. This prevents application of the starter assembly for an inadequate length of time. It also prevents the engine from being cranked after it has started.


b.

When the certification ECU (smart key ECU assembly) detects a start signal (SSW1, SSW2), the certification ECU (smart key ECU assembly) outputs an ST relay drive signal (STAR). The signal goes through the park/neutral position switch assembly to the ST relay. The ST relay activates the starter assembly when it receives this signal. At this time, the certification ECU (smart key ECU assembly) turns off the ACC relay by turning off the power sent from the ACCD terminal. The ACC relay is turned off to prevent flickering of the meters, clock and audio system.


c.

When communication between the certification ECU (smart key ECU assembly) and ECM stops, the certification ECU (smart key ECU assembly) uses the engine speed (NE) signal received from the ECM via a direct line to determine when to turn off the starter.

W130639E02
2.5,4.667 2.667,4.667 2.667,4.667 3.083,4.375 true 0.177,2.958 1.135,3.177 0.958,0.219 10 false Engine Switch 2.365,0.406 3.427,0.99 1.063,0.583 10 false Central Gateway ECU (Network Gateway ECU) 2.313,1.854 3.417,2.448 1.104,0.594 10 false Certification ECU (Smart Key ECU Assembly) 5.948,1.083 6.927,1.656 0.979,0.573 10 false Engine Coolant Temperature Signal 5.948,2.448 6.865,2.844 0.917,0.396 10 false Engine Speed Signal 5.969,3.74 7.094,4.188 1.125,0.448 10 false Stop Light Switch Signal 4.583,2.385 4.969,2.594 0.385,0.208 10 false ECM 1.677,2.646 2.177,3 0.5,0.354 10 false SSW1, SSW2 3.625,2.542 3.875,2.76 0.25,0.219 10 false NE 3.271,3.26 3.688,3.458 0.417,0.198 10 false STAR 2.427,3.25 2.865,3.438 0.438,0.188 10 false ACCD 1.083,3.698 1.833,3.896 0.75,0.198 10 false ACC Relay 1.125,4.573 2.479,4.948 1.354,0.375 10 false Park/Neutral Position Switch Assembly 4.927,4.823 5.281,5.031 0.354,0.208 10 false STA 3.521,5.5 4.208,5.729 0.688,0.229 10 false ST Relay 0.323,6.688 0.833,6.938 0.51,0.25 10 false Battery 2.594,6.333 3.708,6.552 1.115,0.219 10 false Starter Assembly 0.531,7.438 2.26,7.667 1.729,0.229 10 false : CAN Communication Line


d.

While cranking, the certification ECU (smart key ECU assembly) continues energizing the ST relay until it is determined that the engine has started. When the certification ECU (smart key ECU assembly) has judged that the engine has started, the certification ECU (smart key ECU assembly) stops energizing the ST relay.


e.

If the engine does not start even though the starter has cranked for 30 seconds, the ST relay is turned off to protect the starter motor.

W137556E02
1.229,0.375 1.5,0.583 0.271,0.208 10 false ON 1.24,0.844 1.573,1.052 0.333,0.208 10 false OFF 1.24,1.458 1.51,1.667 0.271,0.208 10 false ON 1.229,1.906 1.563,2.115 0.333,0.208 10 false OFF 1.24,2.177 1.51,2.385 0.271,0.208 10 false ON 1.229,2.677 1.563,2.885 0.333,0.208 10 false OFF 0.083,0.5 1.021,0.969 0.938,0.469 10 false Engine Switch (Start Signal) 0.094,1.688 0.74,1.938 0.646,0.25 10 false ST Relay 0.083,2.417 0.854,2.667 0.771,0.25 10 false ACC Relay 0.083,3.333 1,3.75 0.917,0.417 10 false Engine Speed Signal (NE) 5.865,3.844 6.969,4.281 1.104,0.438 10 false Failed Starting of Engine 3.438,1.188 3.635,1.396 0.198,0.208 10 false *1 4.417,3.271 4.615,3.479 0.198,0.208 10 false *2 0.198,4.563 2.135,4.813 1.938,0.25 10 false *1: Cranking Limit: 25 seconds 0.208,4.979 6.583,5.396 6.375,0.417 10 false *2: The certification ECU (smart key ECU assembly) determines that the engine has started successfully when the engine speed is approximately 800 rpm.


f.

This system has the following safety features:

·

While the engine is running, the starter assembly cannot operate.

·

The starter assembly will stop operating once the engine has started, even if the engine switch remains pushed.

·

Starter operation is limited to a maximum of approximately 25 seconds to protect the starter motor.