Home › Engine / Hybrid System › 2AR-FE (INTAKE / EXHAUST) › INTAKE SYSTEM › 2017.09–2021.02
NM33A0E _51 Engine / Hybrid System _067510 2AR-FE INTAKE / EXHAUST _0330151 INTAKE SYSTEM DE DETAILS F

2AR-FE INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  INTAKE MANIFOLD  


CONSTRUCTION


a.

The intake manifold is made of plastic to realize a lightweight construction.


b.

The intake air surge tank consists of an upper and lower section and contains an intake air control valve. This valve is activated by the Acoustic Control Induction System (ACIS) and is used to alter the intake pipe length to improve the engine performance in all engine speed ranges.


c.

The ACIS actuator uses a VSV and a vacuum actuator, and is laser-welded onto the intake air surge tank. Many of the components are made of plastic for weight reduction.


d.

The tumble control valve is provided in the intake manifold. The tumble control valve is activated by the tumble control system.*


e.

A DC motor type intake air control actuator is provided for the tumble control system.*

*: Models with tumble control system

W137636C01
0.25,3.583 6.917,6.333 6.667,2.75 0.25,0.75 6.917,3.5 6.667,2.75 0.917,1.5 0.917,1 0.917,1 1.167,1 true 0.833,4.365 0.833,3.865 0.833,3.865 1.083,3.865 true 3,1.583 3,1.083 3,1.083 3.25,1.083 true 2.917,4.5 2.917,4 2.917,4 3.167,4 true 2,3.083 2,2.417 true 2,5.917 2,5.25 true 3.167,3.083 3.167,2.417 true 3.167,6 3.167,5.333 true 4.667,5.917 4.667,4.833 true 4.167,5.833 4.167,4.75 true 5.167,6 5.167,4.917 true 5.667,6.083 5.667,5 true 6.5,4.5 6.333,4.5 6.333,4.5 6.167,4.917 true 0.323,0.813 0.542,1.031 0.219,0.219 10 false *A 0.354,3.688 0.552,3.875 0.198,0.188 10 false *B 1.198,0.906 1.396,1.125 0.198,0.219 10 false *1 3.292,0.99 3.479,1.188 0.188,0.198 10 false *2 1.938,3.115 2.146,3.313 0.208,0.198 10 false *3 3.104,3.115 3.302,3.313 0.198,0.198 10 false *4 4.094,5.854 4.292,6.042 0.198,0.188 10 false *5 6.531,4.406 6.74,4.615 0.208,0.208 10 false *6 4.615,5.938 4.813,6.125 0.198,0.188 10 false *5 5.094,6.031 5.292,6.219 0.198,0.188 10 false *5 5.604,6.115 5.802,6.302 0.198,0.188 10 false *5 1.104,3.74 1.302,3.958 0.198,0.219 10 false *1 3.208,3.906 3.396,4.104 0.188,0.198 10 false *2 1.927,5.938 2.135,6.135 0.208,0.198 10 false *3 3.104,6.021 3.302,6.219 0.198,0.198 10 false *4
*A Models without Tumble Control System *B Models with Tumble Control System
*1 Mesh Type Gasket *2 VSV (For ACIS)
*3 ACIS Valve *4 ACIS Valve Actuator
*5 Tumble Control Valve *6 Intake Air Control Actuator (for Tumble Control System)


HINT:

Laser-welding: In laser-welding, a laser-absorbing material (for the intake manifold) is joined to a laser-transmitting material (for the ACIS actuator). Laser beams are then irradiated from the laser-transmitting side. The beams penetrate the laser-transmitting material to heat and melt the surface of the laser-absorbing material. Then, the heat of the laser-absorbing material melts the laser-transmitting material and causes both materials to become welded.