Home › Engine / Hybrid System › 2AR-FE (INTAKE / EXHAUST) › INTAKE SYSTEM › 2017.09–2021.02
NM33A0E _51 Engine / Hybrid System _067510 2AR-FE INTAKE / EXHAUST _0330151 INTAKE SYSTEM GE GENERAL F

2AR-FE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A linkless type throttle body with motor assembly is used to realize excellent throttle control.


b.

A plastic intake manifold is used.


c.

The Electronic Throttle Control System-intelligent (ETCS-i) is used to ensure excellent throttle control in all operating ranges. For details, click here Engine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>ENGINE CONTROL.


d.

The Acoustic Control Induction System (ACIS) is used to improve the engine performance in all speed ranges. For details, click here Engine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS) CONTROL.


e.

The tumble control system is used on models with tumble control system to ensure engine performance and reduce exhaust emissions. For details, click here Engine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>TUMBLE CONTROL.


f.

An air cleaner assembly that uses low spring constant grommets for its 3 mounting points to reduce vibration caused by intake pulsing is used. Also, by not using bolts, it is possible to remove or install the air cleaner assembly without tools, enhancing serviceability.


g.

A fine fiber layer has been added to the paper type filter, improving the cleaning performance of the air cleaner filter element sub-assembly.