OUTLINE
The combination meter assembly has a built-in meter ECU and buzzer.
Depending on the specifications of the vehicle, the combination meter has a 4.2 inch or 7 inch multi-information display.
A multi-information display on which various kinds of information is displayed is integrated.
| *a | Multi-information Display | *b | The illustrations are examples that shows the locations of the indicators. |
| *a | Multi-information Display | *b | The illustrations are examples that shows the locations of the indicators. |
Headup Display
A headup display has been adopted to enable the driver to see driving information more easily within their field of view.
The meter mirror sub-assembly and the structure of the windshield glass enables the headup display to project an image as if it is displayed outside of the windshield glass.
| *a | Projected Image from the Headup Display | *b | The illustrations shown are examples only. |
MAIN FEATURES
Combination Meter Assembly (Models with 4.2 Inch Multi-information Display)
Opening/Ending Ceremony
An opening ceremony which allows for anticipation of a pleasant drive is used. The opening ceremony operates as follows:
The following illustration shows the flow of the opening and ending ceremony from when the ignition switch is off and then the engine is started, to when the ignition switch is turned off again.
When the ignition switch is turned on (IG), the multi-information display illuminate.
Then, the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge illuminate.
When the ignition switch is turned off, only the odometer is displayed on the multi-information display.
The needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge fade out.
Then, the odometer fade out.
| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
|
*: Models with navigation system |
|
| Shift Position Indicator | The current shift position is displayed. |
| Outside Temperature | ·
The outside temperature is displayed. ·
When the outside temperature drops below 3°C (37°F), an ice warning to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the ice warning stay on. When the temperature reaches 5°C (41°F), the ice warning goes off. |
| Indicator/Warning | ·
When the display conditions are met, the following indicators illuminate. -
Cruise Control Indicator -
Cruise SET Indicator -
ECO Indicator |
| Information | ·
The following information can be displayed on the multi-information display by switching the tabs. -
Drive Information -
Navigation Information* -
Audio Information -
Warning Message -
Settings
|
| Interrupt Display | ·
When the display conditions are met, the following screen is interrupt display. -
Advisory Display/Warning Display -
Incoming Telephone Display -
Audio Information Display -
Voice Recognition Display -
Rheostat |
| ODO/TRIP Meter | ·
The odometer, trip meter A or trip meter B are displayed. ·
The item shown can be switched by pressing the ODO/TRIP switch. |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch. |
The drive information shows the following information.
| Item | Outline |
|---|---|
| Drive Information | ·
The following items can be displayed. -
Trip (After Start) (1)
Average Fuel Consumption After Engine Start-up (2)
Average Vehicle Speed After Engine Start-up (3)
Elapsed Time After Engine Start-up -
Total (After Reset) (1)
Current Fuel Consumption (Bar Display) (2)
Average Fuel Consumption Between Reset Operations (3)
Total Average Vehicle Speed Between Reset Operations -
Tank (After Refuel) (1)
Cruising Range (2)
Average Fuel Consumption After Refueling ·
In addition to the above functions, the following items can be displayed. -
Eco Driving Indicator Zone Display -
Vehicle speed -
Blank
|
Combination Meter Assembly (Models with 7 Inch Multi-information Display)
Opening/Ending Ceremony
When the ignition switch is turned on (IG), the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge illuminate.
The multi-information display illuminate.
When the ignition switch is turned off, only the odometer is displayed on the multi-information display.
The needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge fade out.
Then, the odometer fade out.
| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
|
*1: Models with blind spot monitor system *2: Models with TOYOTA parking assist-sensor system *3: Models with Toyota safety sense *4: Models with cruise control system *5: Models with rear fog lights *6: Models with drive mode select switch |
|
| Indicator | ·
When the display conditions are met, the following indicators illuminate. -
Blind Spot Monitor Indicator*1 -
RCTA Indicator*1 -
Clearance Sonar Indicator*2 -
Lane Departure Alert Indicator*3 -
Cruise SET Indicator*3, *4 -
Cruise Control Indicator*4 -
Cruise Control Indicator (Constant Speed Control Mode)*3 -
Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*3 -
Automatic High Beam Indicator*3 -
Front Fog Light Indicator -
Rear Fog Light Indicator*5 -
Eco Mode Indicator*6 -
Sport Mode Indicator*6 -
ECO Indicator |
| Dynamic Radar Cruise Control System / Lane Departure Alert System State*3 | Displays the operating state of the dynamic radar cruise control system and lane departure alert system |
| Information | ·
The following information can be displayed on the multi-information display by switching the tabs. -
Warning Message Tab -
Fuel Economy Tab -
Driving Assist System Information Tab -
Audio Information Tab -
Vehicle Information Tab -
Settings Tab
|
| Outside Temperature | ·
The outside temperature is displayed. ·
When the outside temperature drops below 3°C (37°F), an ice warning to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the ice warning stay on. When the temperature reaches 5°C (41°F), the ice warning goes off. |
| Shift Position Indicator | The current shift position is displayed. |
| ODO/TRIP Meter | ·
The odometer, trip meter A or trip meter B are displayed. ·
The item shown can be switched by pressing the ODO/TRIP switch. |
| Vehicle Power Source State | ·
The vehicle power source state is displayed. ·
The following indicator is displayed on the multi-information display. -
Smart Indicator |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch. |
The fuel economy tab shows the following information
| Fuel Economy Information | ·
The following items can be displayed. -
Eco Driving Indicator Zone Display -
Current Fuel Consumption -
Average Fuel Economy (After Start) -
Driving Range -
Gadget
(1)
No Display (2)
Average Speed (After Start) (3)
Average Speed (After Reset) (4)
Distance Travelled (After Start) (5)
Distance Travelled (After Reset) (6)
Elapsed Time (After Start) (7)
Elapsed Time (After Reset) -
Average Fuel Economy
(1)
After Reset (2)
After Refuel |
The driving assist system information tab shows the following information
|
*1: Models with navigation system *2: Models with Toyota safety sense |
|
| Navigation System Information*1 | ·
The following items can be displayed. -
Compass -
Turn-by-turn |
| Dynamic Radar Cruise Control System Information*2 | Dynamic radar cruise control system operation information is displayed. |
| Lane Departure Alert System Information*2 | Lane departure alert system operation information is displayed. |
The audio information tab displays following information.
| Audio Information | The audio source or an audio track can be selected.
|
The vehicle information tab shows the following information
|
*1: Models with tire pressure warning system *2: Models with Toyota safety sense *3: Models with TOYOTA parking assist-sensor system *4: Models with blind spot monitor system |
|
| Tire Pressure Status*1 | ·
Receives and displays the tire pressure of each tire. ·
Tire pressure is displayed as blank when the tire pressure signal cannot be received. ·
The tire pressure value is highlighted to warn the driver if the tire pressure drops below the threshold. |
| System Status | ·
The following items can be displayed. -
Pre-collision system*2 -
Clearance sonar system*3 -
Blind spot monitor system*4 -
RCTA*4
|
The tire pressure status or system status can be selected by pressing the left/right switch of the steering pad switch assembly.
Headup Display
The headup display shows the following information:
The illustrations shown are examples only.
| Area | Displayed Item |
|---|---|
|
*1: Models with Toyota safety sense *2: Models with TOYOTA parking assist-sensor system *3: Models with navigation system |
|
| Full screen | Pre-collision System Display*1 |
| a | TOYOTA Parking Assist-sensor System Display*2 |
| b | Speedometer |
| c | Shift Position Indicator |
| d | ·
The following items can be displayed. -
Dynamic Radar Cruise Control System Display*1 -
Lane Departure Alert System Display*1 -
TOYOTA parking assist-sensor system detection display*2 -
Navigation System Display*3 -
Compass*3 |
| e | ·
The following items can be displayed. -
Hands off steering wheel alert display*1 -
Unsteady driving alert display*1 -
Master Warning -
Outside temperature/icy street warning display -
Information -
Telephone -
Audio system operation status display -
Tachometer |
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expressions | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (LOCK) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |