OPERATION
The combination meter assembly displays recognized signs on the multi-information display based on information of road signs recognized by the forward recognition camera.
The RSA system display mode can be selected by switching the display mode of the multi-information display through operation of the multi-information switch of the steering pad switch assembly.
When the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the forward recognition camera are displayed on the upper portion of the multi-information display.
A maximum of 3 signs can be displayed simultaneously. When 3 signs are displayed, the signs are displayed in the following order from left to right: speed limit related, speed limit with supplemental sign related and no overtaking related.
| *a | Speed Limit Related, Highway sign and All canceled | *b | Speed Limit with Supplemental Sign Related |
| *c | No Overtaking Related | *d | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. |
When an information tab other than the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the forward recognition camera are displayed as pop-ups on the lower center portion of the multi-information display. Furthermore, the pop-up display is only for speed limit signs. It is not displayed for no overtaking signs and speed limit with supplemental signs.
| *a | Multiple Road Signs Recognized | *b | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. |
When there is a malfunction in the RSA system or the system is temporarily unusable, a warning message is displayed on the multi-information display, the master warning light illuminates and the buzzer sounds.
| Condition | Multi-information Display Indication |
|
Buzzer |
|---|---|---|---|
| System malfunction | "Road Sign Assist System Malfunction" | Illuminates | Sounds |
| Forward recognition camera is temporarily malfunctioning
·
Forward recognition camera voltage is abnormal ·
Forward recognition camera temperature is outside of operating range ·
Other malfunction exists in forward recognition camera |
"Front Camera Unavailable" | - | - |
| Forward recognition camera lens or windshield glass is dirty | "Front Camera Vision Blocked Clean and Demist Windshield" | - | - |