Home › Engine / Hybrid System › A25A-FKS (EMISSION CONTROL) › EMISSION CONTROL SYSTEM (w/ Canister Pump Module) › from 2017.12
NM33A0E _51 Engine / Hybrid System _067503 A25A-FKS EMISSION CONTROL _0344592 EMISSION CONTROL SYSTEM(w/ Canister Pump Module) DE DETAILS F

A25A-FKS EMISSION CONTROL  EMISSION CONTROL SYSTEM(w/ Canister Pump Module)  DETAILS  FUEL INLET (FRESH AIR INLET)  


CONSTRUCTION


a.

The fresh air line inlet is located near the fuel inlet pipe opening. Fresh air from the atmosphere and drain air cleaned by the canister go in or out of the system through the passages shown below.

W111768C01
2.594,0.698 2.031,0.281 2.031,0.281 1.813,0.281 true 4.469,2.083 4.823,1.708 4.823,1.708 5.063,1.708 true 3.063,2.229 2.417,1.99 2.417,1.99 2.198,1.99 true 1.635,0.198 1.854,0.396 0.219,0.198 10 false *1 5.104,1.625 5.313,1.823 0.208,0.198 10 false *2 2.031,1.917 2.219,2.094 0.188,0.177 10 false *3 4.667,3.583 4.865,3.76 0.198,0.177 10 true *a
*1 Fuel Tank Cap Assembly *2 Fuel Tank Inlet Pipe Sub-assembly
*3 Canister Filter - -
*a Canister - -
V100135

Fresh Air
V100136

Cleaned Drain Air