FUNCTION
|
*1: Models with Toyota safety sense *2: Models with blind spot monitor system *3: Models with parking assist monitor system *4: Models with TOYOTA parking assist-sensor system *5: Models with radio and display receiver assembly *6: Models with occupant classification system *7: Models with tire pressure warning system (for tire inflation pressure display function) *8: Models with automatic headlight beam level control system *9: Models with seat position memory system *10: Models with smart entry and start system *11: Models with headup display system *12: Models with power tilt and power telescopic system *13: Models with accessory gateway ECU |
|
| Central Gateway ECU (Network Gateway ECU) | Forward Recognition Camera*1 |
| Millimeter Wave Radar Sensor Assembly*1 | Blind Spot Monitor Sensor RH*2 |
| Rear Television Camera Assembly*3 | Clearance Warning ECU Assembly*4 |
| ECM | Radio and Display Receiver Assembly*5 |
| Occupant Detection ECU*6 | Tire Pressure Warning ECU and Receiver*7 |
| Power Steering ECU (Rack and Pinion Power Steering Gear Assembly) | Skid Control ECU (Brake Actuator Assembly) |
| Steering Sensor | Airbag Sensor Assembly |
| Headlight ECU Sub-assembly RH*8 | Outer Mirror Control ECU Assembly RH*9 |
| Position Control ECU Assembly RH*9 | Outer Mirror Control ECU Assembly LH*9 |
| Air Conditioning Amplifier Assembly | Main Body ECU (Multiplex Network Body ECU) |
| Certification ECU (Smart Key ECU Assembly)*10 | Headup Display (Meter Mirror Sub-assembly)*11 |
| Headlight ECU Sub-assembly LH*8 | Multiplex Tilt and Telescopic ECU*12 |
| Combination Meter Assembly | Accessory Gateway ECU (Network Gateway ECU)*13 |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.
For details, refer to the Repair Manual.