Home › Drivetrain › U761E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › 2018.04–2021.02
NM33A0E _52 Drivetrain _072328 U761E AUTOMATIC TRANSMISSION / TRANSAXLE _0351294 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U761E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  ATF FILLING PROCEDURE  


CONSTRUCTION


a.

A special ATF filling procedure is used in order to improve the accuracy of the ATF level when the transaxle is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.


b.

This filling procedure uses a refill plug, overflow plug, ATF temperature sensor, and the D indicator. For details about the ATF filling procedure, refer to the Repair Manual.

X140253C01
5.958,3.156 5.958,2.844 true 5.875,2.104 5.531,1.385 5.531,1.385 5.354,1.385 true 0.531,0.625 0.844,0.781 0.313,0.156 10 false *1 5.896,3.177 6.208,3.333 0.313,0.156 10 false *2 5.188,1.292 5.5,1.448 0.313,0.156 10 false *a
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -