Home › Drivetrain › U761E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › 2018.04–2021.02
NM33A0E _52 Drivetrain _072328 U761E AUTOMATIC TRANSMISSION / TRANSAXLE _0351294 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U761E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  TRANSMISSION REVOLUTION SENSOR  


CONSTRUCTION


a.

The U761E automatic transaxle uses an input speed sensor NT and an output speed sensor NC. Thus, the ECM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to the various conditions.


b.

The input speed sensor NT detects the input speed of the transaxle. The No. 2 clutch piston is used as the timing rotor for this sensor.


c.

The output speed sensor NC detects the speed of the counter gear. The counter drive gear is used as the timing rotor for this sensor.


d.

A Hall type speed sensor consists of a magnet and a Hall IC. The Hall IC converts the changes in the magnetic flux density that occur through the rotation of the timing rotor into an electric signal, and outputs the signal to the ECM.

X104226C01
2.073,3.229 2.073,3.906 true 2.521,2.115 2.198,1.427 2.198,1.427 1.99,1.427 true 2.76,1.708 2.375,0.802 2.375,0.802 2.198,0.802 true 3.531,1.948 4.021,0.802 4.021,0.802 4.198,0.802 true 4.771,2.5 5.26,1.531 5.26,1.531 5.49,1.531 true 2,0.719 2.198,0.906 0.198,0.188 10 false *2 1.823,1.313 2.031,1.5 0.208,0.188 10 false *1 4.26,0.708 4.51,0.896 0.25,0.188 10 false *3 5.542,1.448 5.76,1.646 0.219,0.198 10 false *4 2,3.938 2.229,4.125 0.229,0.188 10 false *5
*1 No. 2 Upper Valve Body *2 Transmission Revolution Sensor
·

Input Speed Sensor NT


*3 Transmission Revolution Sensor
·

Output Speed Sensor NC


*4 No. 1 Upper Valve Body
*5 Lower Valve Body - -
V100135

Engine Side - -