Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › SFI SYSTEM › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072440 6AR-FSE ENGINE CONTROL _0351695 SFI SYSTEM DE DETAILS F

6AR-FSE ENGINE CONTROL  SFI SYSTEM  DETAILS  FUEL PUMP CONTROL  


OPERATION


a.

The ECM transmits a fuel pump operation request signal to the fuel pump control ECU that corresponds to the engine operating conditions. Based on the signal received from the ECM, the fuel pump control ECU controls the power supplied to the fuel pump to 3 levels (low, mid and high). Battery voltage is directly supplied to the fuel pump for high. However, for mid and low, Pulse Width Modulation (PWM) control is used to control the power supplied. This contributes to fuel economy by reducing current consumption compared to conventional control, which operates by switching a resistor in and out of the circuit.


b.

The fuel pump control system has a fuel cut control function. Fuel cut control stops the fuel pump when any of the SRS airbags has deployed.

W139393E01
0.583,5.406 2.323,5.625 1.74,0.219 10 false : CAN Communication Line 0.167,0.885 0.844,1.552 0.677,0.667 10 false from Each Airbag Sensor 1.427,0.49 2.104,1.146 0.677,0.656 10 false Airbag Sensor Assembly 1.323,2.219 2.26,2.969 0.938,0.75 10 false Central Gateway ECU (Network Gateway ECU) 3.333,1.885 3.719,2.094 0.385,0.208 10 false ECM 5.448,0.51 6.51,0.896 1.063,0.385 10 false EFI-MAIN NO. 2 Relay 4.833,1.771 5.635,2.313 0.802,0.542 10 false Fuel Pump Control ECU 6.156,1.698 6.865,1.938 0.708,0.24 10 false Fuel Pump 3.125,3.75 4.177,4.49 1.052,0.74 10 false Fuel Pump Drive Signal (Fuel Pump Speed Control) 5.813,4.146 6.125,4.323 0.313,0.177 10 false OFF 5.813,3.948 6.083,4.135 0.271,0.188 10 false ON 4.51,4.021 4.813,4.229 0.302,0.208 10 false Hi : 4.417,4.344 4.823,4.563 0.406,0.219 10 false Mid : 4.479,4.635 4.813,4.844 0.333,0.208 10 false Lo : 4.094,4.958 4.781,5.167 0.688,0.208 10 false OFF : 0 V