Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › SFI SYSTEM › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072440 6AR-FSE ENGINE CONTROL _0351695 SFI SYSTEM DE DETAILS F

6AR-FSE ENGINE CONTROL  SFI SYSTEM  DETAILS  VACUUM SENSOR  


CONSTRUCTION


a.

The vacuum sensor assembly detects pressure inside the intake manifold as an absolute pressure with a built-in sensor and outputs a voltage. Based on the voltage from the vacuum sensor assembly, the ECM controls the air fuel ratio and EGR.


b.

The vacuum sensor assembly consists of a silicon chip which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it. The sensor converts the pressure into an electrical signal, and sends it to the ECM in an amplified form.

W132362E07
1.49,1.177 1.958,0.271 1.958,0.271 2.219,0.271 true 2.271,0.177 3.042,0.396 0.771,0.219 10 false Silicon Chip 3.635,0.25 5.01,0.49 1.375,0.24 10 false Output Characteristic 4.323,0.521 4.583,0.771 0.26,0.25 10 false (V) 3.771,1.135 4.271,1.615 0.5,0.479 10 false Output Voltage 4.615,2.125 6.021,2.354 1.406,0.229 10 false Atmospheric Pressure 6.208,1.938 6.604,2.198 0.396,0.26 10 false (kPa) 1.188,2.333 2.979,2.594 1.792,0.26 10 false Vacuum Sensor Assembly