Home › Engine / Hybrid System › 6AR-FSE (ENGINE MECHANICAL) › ENGINE UNIT › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072441 6AR-FSE ENGINE MECHANICAL _0351748 ENGINE UNIT DE DETAILS F

6AR-FSE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD COVER  


CONSTRUCTION


a.

A lightweight and high-strength aluminum cylinder head cover sub-assembly is used.


b.

An oil delivery pipe is installed inside the cylinder head cover sub-assembly. This ensures lubrication to the sliding parts of the No. 1 valve rocker arm sub-assemblies, improving reliability.


c.

An oil separator (ventilation case sub-assembly) is provided in the blow-by gas passage inside the cylinder head cover sub-assembly. This separates the engine oil from the blow-by gas in order to reduce oil degradation and reduce the amount of engine oil consumed.


d.

Acrylic rubber, which excels in heat resistance and reliability, is used for the cylinder head cover gasket.


e.

The camshaft timing oil control valve assembly is installed in the cylinder head cover sub-assembly. This simplifies oil passage.

W124688C01
5.396,1.438 5.635,0.75 5.635,0.75 5.823,0.75 true 2.635,0.906 2.875,0.219 2.875,0.219 3.063,0.219 true 2.354,2.552 2.5,3.021 2.5,3.021 2.688,3.021 true 3.104,0.125 3.417,0.281 0.313,0.156 10 false *1 2.719,2.906 3.031,3.063 0.313,0.156 10 false *2 5.302,2.542 5.615,2.698 0.313,0.156 10 false *a 5.875,0.646 6.188,0.802 0.313,0.156 10 false *b
*1 Cylinder Head Cover Sub-assembly *2 Cylinder Head Cover Gasket
*a View from Bottom Side *b Oil Delivery Pipe