Home › Engine / Hybrid System › 6AR-FSE (ENGINE MECHANICAL) › ENGINE UNIT › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072441 6AR-FSE ENGINE MECHANICAL _0351748 ENGINE UNIT DE DETAILS F

6AR-FSE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

A high-expansion cycle (Atkinson cycle) is used to improve heat efficiency.


b.

On the intake side, Variable Valve Timing-intelligent Wide (VVT-iW), which is provided with an intermediate lock mechanism that optimally controls the intake camshaft (camshaft) to the valve timings according to driving conditions, is used.


c.

On the exhaust side, Variable Valve Timing-intelligent (VVT-i), which optimally controls the exhaust camshaft (No. 2 camshaft) to the valve timings according to driving conditions, is used.

Valve Timing Variable Range
W123161E02
4.49,1.25 4.76,1.573 4.76,1.573 4.99,1.573 true 2.708,1.26 2.594,1.563 2.594,1.563 2.417,1.563 true 4.438,1 4.823,0.75 4.823,0.75 5.083,0.75 true 0.125,0.146 2.573,0.344 2.448,0.198 10 false VVT-iW (Intake) + VVT-i (Exhaust) 0.146,1.938 2.594,2.135 2.448,0.198 10 false Dual VVT-i (Reference) 1.667,0.833 2.521,1.063 0.854,0.229 10 false Valve Lift 1.781,2.677 2.635,2.906 0.854,0.229 10 false Valve Lift 2.938,0.063 3.792,0.292 0.854,0.229 10 false Retard 2.875,1.979 3.615,2.281 0.74,0.302 10 false Retard 3.583,0.063 4.438,0.292 0.854,0.229 10 false Advance 4.25,0.063 5.104,0.292 0.854,0.229 10 false Retard 3.604,1.979 4.448,2.271 0.844,0.292 10 false Advance 5.052,1.458 5.906,1.688 0.854,0.229 10 false Intake 3.156,1.396 4.625,1.646 1.469,0.25 10 false Crank Angle (CA) 3.115,3.24 4.583,3.49 1.469,0.25 10 false Crank Angle (CA) 1.875,1.458 2.729,1.688 0.854,0.229 10 false Exhaust 5.135,0.656 6.104,1.052 0.969,0.396 10 false Lock Position


d.

The No. 1 valve rocker arm sub-assembly is used as a valve mechanism and by achieving size reduction while drastically reducing the amount of friction that occurs between the sliding parts and cams, low fuel consumption is achieved. Also, an oil pressure type valve lash adjuster assembly is used to make valve clearance adjustment unnecessary in consideration of serviceability.


e.

A valve spring (inner compression spring), whose upper portion is shaped like a beehive, is used to reduce inertial mass. As a result, the load on the valve spring (inner compression spring) and friction are reduced.

W124991C01
1.74,1.542 1.5,0.865 1.5,0.865 1.323,0.865 true 2.052,1.448 1.865,0.469 1.865,0.469 1.688,0.469 true 3.125,1.25 2.938,0.271 2.938,0.271 2.76,0.271 true 2.302,1.99 2.583,2.406 2.583,2.406 2.74,2.406 true 2.917,1.719 2.948,2.01 2.948,2.01 3.104,2.01 true 1.979,3.844 1.833,4.25 1.833,4.25 1.667,4.25 true 5.865,1.344 6.042,0.979 6.042,0.979 6.198,0.979 true 5.615,1.948 5.927,2.479 5.927,2.479 6.083,2.479 true 5.896,1.74 6.146,1.74 true 5.313,3.354 5.563,3.354 true 1.583,2.458 1.833,2.458 true 1.365,3 1.615,3 true 1.115,0.75 1.427,0.906 0.313,0.156 10 false *1 1.49,0.375 1.802,0.531 0.313,0.156 10 false *2 2.573,0.188 2.885,0.344 0.313,0.156 10 false *3 2.781,2.302 3.094,2.458 0.313,0.156 10 false *4 3.135,1.917 3.448,2.073 0.313,0.156 10 false *5 1.396,2.375 1.708,2.531 0.313,0.156 10 false *6 1.188,2.906 1.5,3.063 0.313,0.156 10 false *7 1.469,4.156 1.781,4.313 0.313,0.156 10 false *8 6.24,0.885 6.552,1.042 0.313,0.156 10 false *9 6.177,1.635 6.646,1.792 0.469,0.156 10 false *10 6.115,2.375 6.583,2.531 0.469,0.156 10 false *11 5.604,3.25 6.073,3.406 0.469,0.156 10 false *12
*1 Camshaft Timing Gear Assembly *2 Timing Chain Guide
*3 Intake Camshaft (Camshaft) *4 Camshaft Timing Exhaust Gear Assembly
*5 Exhaust Camshaft (No. 2 Camshaft) *6 Chain Tensioner Slipper
*7 No. 1 Chain Tensioner Assembly *8 Chain Sub-assembly
*9 No. 1 Valve Rocker Arm Sub-assembly *10 Valve Lash Adjuster Assembly
*11 Valve Spring (Inner Compression Spring) *12 Valve


Valve Timing
W137980E01
1.896,2.656 2.063,2.656 2.063,2.656 2.313,2.323 true 3.885,0.51 4.135,0.094 4.135,0.094 4.302,0.094 true 4.333,3.031 4.583,3.531 4.583,3.531 4.75,3.531 true 4.396,0.823 4.646,0.406 4.646,0.406 4.813,0.406 true 0.406,0.083 2.313,0.333 1.906,0.25 10 false : Intake Valve Opening Angle 0.406,0.417 2.375,0.667 1.969,0.25 10 false : Exhaust Valve Opening Angle 4.177,0.365 4.49,0.594 0.313,0.229 10 false 35° 3.458,0.042 3.854,0.302 0.396,0.26 10 false TDC 3.438,3.49 3.833,3.75 0.396,0.26 10 false BDC 0.323,2.573 1.958,2.833 1.635,0.26 10 false VVT-iW Operation Range 4.396,0.021 6.031,0.281 1.635,0.26 10 false VVT-iW Operation Range 4.906,0.333 6.542,0.594 1.635,0.26 10 false VVT-i Operation Range 4.833,3.458 6.469,3.719 1.635,0.26 10 false VVT-i Operation Range 4.76,0.771 5.073,1 0.313,0.229 10 false 50° 4.938,2.646 5.25,2.875 0.313,0.229 10 false 60° 3.76,3.469 4.073,3.698 0.313,0.229 10 false 10° 2.365,3.031 2.677,3.26 0.313,0.229 10 false 45° 1.792,1.406 2.229,1.646 0.438,0.24 10 false 105° 2.552,0.49 2.865,0.719 0.313,0.229 10 false 25° 3.542,0.198 3.854,0.427 0.313,0.229 10 false 0°