Home › Engine / Hybrid System › 6AR-FSE (ENGINE MECHANICAL) › ENGINE UNIT › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072441 6AR-FSE ENGINE MECHANICAL _0351748 ENGINE UNIT DE DETAILS F

6AR-FSE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

A small end bushing, which uses a material that can withstand high pressures, is used to improve reliability.


d.

Plastic region tightening bolts are used for the connecting rod sub-assemblies.


e.

Aluminum bearings are used for the connecting rod bearings.


f.

Resin coated aluminum connecting rod bearings are used for the connecting rod bearings. The connecting rod bearings are reduced in width to reduce friction.


g.

Lead-free materials have been used for the connecting rod sub-assembly, small end bushing, connecting rod bearing and connecting rod bolt in consideration of environmental issues.

W124696C01
2.406,2.594 2.813,2.594 true 1.167,2.594 1.573,2.594 true 2.375,2.229 2.781,2.229 true 5.281,1.615 5.688,1.615 true 1.156,1.01 1.969,1.01 true 0.969,0.927 1.281,1.083 0.313,0.156 10 false *1 0.969,2.49 1.281,2.646 0.313,0.156 10 false *2 5.719,1.521 6.031,1.677 0.313,0.156 10 false *3 2.833,2.135 3.146,2.292 0.313,0.156 10 false *a 2.833,2.49 3.146,2.646 0.313,0.156 10 false *2
*1 Connecting Rod Sub-assembly *2 Plastic Tightening Region Bolt
*3 Connecting Rod Bearing - -
*a Knock Pin - -
V100145

Resin Coating - -