Home › Engine / Hybrid System › 6AR-FSE (INTAKE / EXHAUST) › EXHAUST SYSTEM › 2018.04–2021.02
NM33A0E _51 Engine / Hybrid System _072444 6AR-FSE INTAKE / EXHAUST _0351834 EXHAUST SYSTEM DE DETAILS F

6AR-FSE INTAKE / EXHAUST  EXHAUST SYSTEM  DETAILS  EXHAUST MANIFOLD  


CONSTRUCTION


a.

A stainless steel exhaust manifold converter sub-assembly is used. This achieves a reduction in noise, ensures heat resistance, and realizes quick warm-up of the catalyst immediately after engine start, helping to reduce emissions.


b.

The exhaust manifold converter sub-assembly with an integrated three-way catalyst (TWC) is used. This realizes quick warm-up of the catalytic converter, helping to reduce emissions immediately after engine start.


c.

The EGR system, which extracts emissions from downstream of the catalyst, is used. For the EGR system, refer to 6AR-FSE Emission Control System.

W138000C01
2.552,2.74 3.365,2.74 true 2.281,1.844 2.469,1.844 2.469,1.844 3.146,0.885 true 4.063,2.438 4.875,2.438 true 2.094,1.75 2.406,1.906 0.313,0.156 10 false *1 4.938,2.344 5.25,2.5 0.313,0.156 10 false *a 2.365,2.646 2.677,2.802 0.313,0.156 10 false *b
*1 Exhaust Manifold Converter Sub-assembly - -
*a TWC *b EGR Gas Passage