Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › 2018.04–2021.02
NM33A0E _57 Power Source / Network _067341 NETWORKING _0328400 CAN COMMUNICATION SYSTEM CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota safety sense

*2: Models with blind spot monitor system

*3: Models with parking assist monitor system or panoramic view monitor system

*4: Models with TOYOTA parking assist-sensor system

*5: Models with radio and display receiver assembly

*6: Models with occupant classification system

*7: Models with tire pressure warning system (for tire inflation pressure display function)

*8: Models with automatic headlight beam level control system

*9: Models with seat position memory system

*10: LHD Models with seat position memory system

*11: RHD Models with seat position memory system

*12: Models with smart entry and start system

*13: Models with headup display system

*14: Models with power tilt and power telescopic system

*15: Models with accessory gateway ECU

*16: Models with panoramic view monitor system

*17: Models with manual (SOS) switch

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Blind Spot Monitor Sensor RH*2
Rear Television Camera Assembly*3 Clearance Warning ECU Assembly*4
ECM Radio and Display Receiver Assembly*5
Occupant Detection ECU*6 Tire Pressure Warning ECU and Receiver*7
Power Steering ECU (Rack and Pinion Power Steering Gear Assembly) Skid Control ECU (Brake Actuator Assembly)
Steering Sensor Airbag Sensor Assembly
Headlight ECU Sub-assembly RH*8 Outer Mirror Control ECU Assembly RH*9
Position Control ECU Assembly LH*10 Position Control ECU Assembly RH*11
Outer Mirror Control ECU Assembly LH*9 Air Conditioning Amplifier Assembly
Main Body ECU (Multiplex Network Body ECU) Certification ECU (Smart Key ECU Assembly)*12
Headup Display (Meter Mirror Sub-assembly)*13 Headlight ECU Sub-assembly LH*8
Multiplex Tilt and Telescopic ECU*14 Combination Meter Assembly
Accessory Gateway ECU (Network Gateway ECU)*15 Television Camera Controller*16
Telematics Transceiver (Data Communication Module)*17 -


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.


c.

For details, refer to the Repair Manual.