Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › from 2018.08
NM33A0E _53 Suspension _065977 FRONT SUSPENSION _0328976 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

A low-pressure (N2) gas sealed front shock absorber with digressive type piston valve is used to achieve a high level of controllability, driving stability and ride comfort.

HINT:

To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.



b.

The digressive type piston valve opens in 2 different stages according to the piston speed to ensure an optimal damping force at very low piston speeds and middle/high piston speeds.

i.

As only the stage 1 valve opens at very low piston speeds to ensure sufficient damping force even during minor movements, an enhanced response and comfortable flat ride have been achieved.


ii.

At middle/high piston speeds such as during a strong input, the stage 1 and stage 2 valves open to reduce the damping force in order to increase ride comfort and reduce transmitted shock.

X135707C01
4.042,0.917 6.375,2.719 2.333,1.802 4.042,2.927 6.375,4.729 2.333,1.802 1.5,3.021 2.406,3.021 true 1.5,4.01 2.177,4.01 true 1.521,5.219 2.198,5.219 true 2.563,4.656 3.26,4.656 true 2.75,3.146 3.219,3.146 true 1.552,1.198 1.802,1.198 1.802,1.198 2.375,1.844 true 1.354,1.135 1.667,1.292 0.313,0.156 10 false *1 1.313,2.948 1.625,3.104 0.313,0.156 10 false *2 1.323,3.938 1.635,4.094 0.313,0.156 10 false *3 1.344,5.146 1.656,5.302 0.313,0.156 10 false *4 3.323,4.583 3.635,4.74 0.313,0.156 10 false *5 3.271,3.073 3.583,3.229 0.313,0.156 10 false *6 3.906,0.75 4.219,0.906 0.313,0.156 10 false *a 4.094,0.958 4.406,1.115 0.313,0.156 10 false *b 4.094,2.969 4.406,3.125 0.313,0.156 10 false *c
*1 Oil Seal *2 Rebound Stopper
*3 Digressive Type Piston Valve *4 Base Valve
*5 Oil *6 Low-pressure (N2) Gas
*a Extension Passage *b Very Low Piston Speed
*c Middle/High Piston Speed - -




c.

By directly installing the suspension tower damper to the shock absorber assembly, steering wheel vibrations and road noise have been suppressed.*

*: Models with suspension tower damper

X135708C01
2.323,1.646 2.531,1.646 2.531,1.646 2.885,2.219 true 2.146,1.573 2.5,1.792 0.354,0.219 10 false *1
*1 Suspension Tower Damper - -