Home › Engine / Hybrid System › M20A-FKS (ENGINE MECHANICAL) › ENGINE UNIT › from 2021.02
NM33A0E _51 Engine / Hybrid System _098546 M20A-FKS ENGINE MECHANICAL _0461151 ENGINE UNIT DE DETAILS F

M20A-FKS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSTRUCTION


a.

A bushing chain with an 8.0 mm (0.315 in.) pitch is used.


b.

The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times. The No. 1 chain tensioner assembly suppresses noise generated by the chain sub-assembly.


c.

Resin with excellent abrasion resistance is used on the shoes of the chain tensioner slipper and No. 1 chain vibration damper.

W140389C01
2.792,1.698 2.958,1.698 2.958,1.698 3.25,1.573 true 3.51,0.479 3.708,0.146 3.708,0.146 3.854,0.146 true 3.031,2.573 3.198,2.573 3.198,2.573 3.583,2.365 true 3.99,2.417 4.292,2.594 4.292,2.594 4.458,2.594 true 3.906,0.052 4.219,0.208 0.313,0.156 10 false *1 2.573,1.583 2.885,1.74 0.313,0.156 10 false *2 2.792,2.469 3.104,2.625 0.313,0.156 10 false *3 4.573,2.49 4.885,2.646 0.313,0.156 10 false *4
*1 Chain Sub-assembly *2 No. 1 Chain Tensioner Assembly
*3 Chain Tensioner Slipper *4 No. 1 Chain Vibration Damper