Home › Engine / Hybrid System › M20A-FKS (ENGINE MECHANICAL) › ENGINE UNIT › from 2021.02
NM33A0E _51 Engine / Hybrid System _098546 M20A-FKS ENGINE MECHANICAL _0461151 ENGINE UNIT DE DETAILS F

M20A-FKS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

A tapered design is used for the small end of the connecting rod sub-assemblies to reduce weight.


d.

Resin coated aluminum connecting rod bearings are used for the connecting rod bearings.


e.

Lead-free materials have been used for the connecting rod sub-assembly, small end bushing and connecting rod bearing in consideration of environmental issues.

W140384C01
1.021,1.333 1.188,1.333 1.188,1.333 1.521,1.583 true 0.75,3.333 0.917,3.333 0.917,3.333 1.125,3.125 true 2.323,2.5 2.156,2.5 2.156,2.5 1.938,2.719 true 6.333,2.417 6.167,2.417 6.167,2.417 5.99,2.146 true 0.823,1.24 1.135,1.396 0.313,0.156 10 false *1 0.563,3.229 0.875,3.385 0.313,0.156 10 false *2 6.427,2.313 6.74,2.469 0.313,0.156 10 false *3 2.406,2.417 2.719,2.573 0.313,0.156 10 false *a
*1 Connecting Rod Sub-assembly *2 Plastic Region Tightening Bolt (Connecting Rod Bolt)
*3 Connecting Rod Bearing - -
*a Knock Pin - -
V100145

Resin Coating - -