Home › Engine / Hybrid System › M20A-FKS (INTAKE / EXHAUST) › INTAKE SYSTEM › from 2021.02
NM33A0E _51 Engine / Hybrid System _098548 M20A-FKS INTAKE / EXHAUST _0461153 INTAKE SYSTEM GE GENERAL F

M20A-FKS INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A linkless-type throttle body with motor assembly is used to achieve excellent throttle control.


b.

The Electronic Throttle Control System-intelligent (ETCS-i) is used to ensure excellent throttle control in all operating ranges. For details, refer to M20A-FKS ENGINE CONTROL.


c.

A large volume intake air resonator is used to improve quietness.


d.

An air cleaner assembly that uses low spring constant grommets for its 3 mounting points to reduce vibration caused by intake pulsing is used. Also, by not using bolts, it is possible to remove or install the air cleaner assembly without tools, enhancing serviceability.


e.

A fine fiber layer has been added to the paper type filter, improving the cleaning performance of the air cleaner filter element sub-assembly.