Home › Engine / Hybrid System › M20A-FKS (COOLING) › COOLING FAN SYSTEM › from 2021.02
NM33A0E _51 Engine / Hybrid System _098549 M20A-FKS COOLING _0461155 COOLING FAN SYSTEM DE DETAILS F

M20A-FKS COOLING  COOLING FAN SYSTEM  DETAILS  COOLING FAN AND COOLING FAN SHROUD  


CONSTRUCTION


a.

According to signals from the ECM, the cooling fan ECU steplessly controls the cooling fan speed depending on the engine conditions, driving conditions and air condition system operation, etc. By always optimally controlling the cooling fan speed, an increase in cooling performance is achieved while greatly reducing noise.


b.

By integrating the cooling fan ECU into the fan with motor assembly, a reduction in parts is achieved.


c.

A cooling fan with a belt shaped ring around its outer circumference to increase stiffness has been adopted, resulting in a more compact and lightweight design.

W141819C01
2.594,1.292 2.813,0.448 2.813,0.448 2.948,0.448 true 2.448,3.542 2.313,3.542 2.313,3.542 2.188,3.188 true 4.01,3.469 3.875,3.469 3.875,3.469 3.385,2.063 true 5.094,0.385 5.396,0.167 5.396,0.167 5.531,0.167 true 3.448,3.635 3.313,3.635 3.313,3.635 3,2.74 true 3,0.354 3.313,0.51 0.313,0.156 10 false *1 5.583,0.073 5.896,0.229 0.313,0.156 10 false *2 4.073,3.385 4.385,3.542 0.313,0.156 10 false *3 3.49,3.542 3.802,3.698 0.313,0.156 10 false *4 2.49,3.458 2.802,3.615 0.313,0.156 10 false *5
*1 Fan Shroud *2 Radiator Cap Sub-assembly
*3 Fan with Motor Assembly
·

Cooling Fan ECU


*4 Fan
*5 Drain Plug - -