Home › Drivetrain › K120 (CVT) › CVT SYSTEM › from 2021.02
NM33A0E _52 Drivetrain _099232 K120 CVT _0463353 CVT SYSTEM GE GENERAL F

K120 CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K120 Continuously Variable Transaxle (CVT) is used.


b.

A 10-speed sport sequential shiftmatic system is used.


c.

A straight type shift lever is used.


d.

A CVT fluid warmer is used in the CVT fluid cooling system.


e.

2 discharge port oil pump system is used.


f.

In addition to the conventional metal belt between pulleys that transmits motive force, a gear transmission mechanism similar to an MT that is used when starting off and driving at low speeds has been added.



SPECIFICATION


Torque Converter Assembly
Item Specification
Torque Converter Assembly Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.8

Continuously Variable Transaxle
Item Specification

*1: Differential included.

*2: The weight shown is when the transaxle is filled with fluid.

Shift Mechanism Type Pulley and Steel Belt
Forward/Reverse Switching Mechanism Single Pinion Type Planetary Gear
Gear Ratio Forward 3.377
Reverse 3.136
Pulley Ratio Forward 2.236 to 0.447
Reverse -
Final Gear Ratio 4.262
Shift Pattern P - R - N - D - M
Fluid Capacity*1 Liters (US qts, Imp. qts) 8.7 (9.2, 7.7)
Fluid Type Toyota Genuine CVT Fluid FE
Weight (Reference)*2 kg (lb) 89.3 (196.9)

Gears and Friction Discs
Item Specification
Gear transmission mechanism No. 1 Drive Gear No. of Teeth 27
No. 1 Driven Gear No. of Teeth 40
No. 2 Drive Gear No. of Teeth 25
No. 2 Driven Gear No. of Teeth 57
Planetary Gear Sun Gear No. of Teeth 39
No. 1 Pinion No. of Teeth 18
No. 2 Pinion No. of Teeth 17
Ring Gear No. of Teeth 81
Reduction Gear Drive Gear No. of Teeth 31
Driven Gear No. of Teeth 37
Final Gear Drive Gear No. of Teeth 21
Driven Gear No. of Teeth 75
C1 No. 1 Clutch No. of Discs 3
C2 No. 2 Clutch No. of Discs 4
B1 No. 1 Brake No. of Discs 3


MAIN FEATURES


a.

The K120 CVT has achieved the following characteristics through the use of the items listed below.

Item Fuel Economy Power Efficiency Driveability Quietness Compact and Lightweight

○: Applicable

-: Not applicable

Flat Torus Torque Converter ○ ○ ○
Synchro Engagement Gear Transmission Mechanism ○ ○ ○ ○
Compact Continuously Variable Transmission Mechanism ○ ○ ○
Narrow Angle Belt ○ ○
Belt/Gear Transmission Switching Mechanism ○ ○ ○ ○
Vane Type Oil Pump ○ ○
2 Discharge Port Oil Pump ○
Low Viscosity CVT Fluid FE ○
Gear Ratio Pressure Control ○ ○
Oil Pressure Controller Front Arrangement ○ ○
Valve Body Artificial Aging Treatment Added ○
Electronic Control System Automatic Shift Control ○ ○ ○
Acceleration Improvement Control ○ ○
Deceleration Improvement Control ○
10-speed Sport Sequential Shiftmatic ○
Uphill/Downhill Shift Control ○
Engine-CVT Integrated Control ○ ○ ○
Flex Lock-up Control ○ ○ ○
Clutch Capacity Control ○ ○



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)