CONSTRUCTION
A vane type oil pump is used.
The oil pump assembly has 1 inlet port and 2 discharge ports.
By separating the oil pump axis from the input axis and connecting them with a chain drive, the overall length of the transmission can be reduced.
| *1 | Front Support | *2 | Drive Sprocket |
| *3 | Driven Sprocket | *4 | Oil Pump Body |
| *5 | Cam Ring | *6 | Roter |
| *7 | Oil Pump Case | *8 | Vane |
| *a | Inlet Port | *b | Low Pressure Discharge Port |
| *c | High Pressure Discharge Port | - | - |
The 2 discharge port oil pump system enables the selection of 2 oil pressure modes in accordance with the engine operating conditions, reducing the required oil pump drive torque.