FUNCTION
|
*1: Models with Toyota safety sense *2: Models with blind spot monitor system *3: Models with parking assist monitor system or panoramic view monitor system *4: Models with panoramic view monitor system *5: Models with TOYOTA parking assist-sensor system *6: Models with continuously variable transaxle *7: Models with radio and display receiver assembly *8: Models with manual (SOS) switch *9: Models with CAN compatible optional devices *10: Models with accessory gateway ECU *11: Models with occupant classification system *12: Models with tire pressure warning system (for tire inflation pressure display function) *13: Models with automatic headlight beam level control system *14: Models with seat position memory system *15: LHD Models with seat position memory system *16: RHD Models with seat position memory system *17: Models with smart entry and start system *18: Models with headup display system *19: Models with power tilt and power telescopic system |
|
| Central Gateway ECU (Network Gateway ECU) | Forward Recognition Camera*1 |
| Millimeter Wave Radar Sensor Assembly*1 | Blind Spot Monitor Sensor RH*2 |
| Rear Television Camera Assembly*3 | Television Camera Controller*4 |
| Clearance Warning ECU Assembly*5 | Transmission Control ECU*6 |
| ECM | Radio and Display Receiver Assembly*7 |
| Telematics Transceiver (Data Communication Module)*8 | Option Connector (Bus Buffer ECU)*9 |
| Accessory Gateway ECU (Network Gateway ECU)*10 | Occupant Detection ECU*11 |
| Tire Pressure Warning ECU and Receiver*12 | Power Steering ECU (Rack and Pinion Power Steering Gear Assembly) |
| Skid Control ECU (Brake Actuator Assembly) | Steering Sensor |
| Airbag Sensor Assembly | Headlight ECU Sub-assembly RH*13 |
| Outer Mirror Control ECU Assembly RH*14 | Position Control ECU Assembly LH*15 |
| Position Control ECU Assembly RH*16 | Outer Mirror Control ECU Assembly LH*14 |
| Air Conditioning Amplifier Assembly | Main Body ECU (Multiplex Network Body ECU) |
| Certification ECU (Smart Key ECU Assembly)*17 | Headup Display (Meter Mirror Sub-assembly)*18 |
| Headlight ECU Sub-assembly LH*13 | Multiplex Tilt and Telescopic ECU*19 |
| Combination Meter Assembly | - |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.
For details, refer to the Repair Manual.