Home › General › INTRODUCTION › FEATURES › from 2021.02
NM33A0E _V1 General _068180 INTRODUCTION _0332937 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

M20A-FKS Engine

i.

The M20A-FKS engine is an in-line 4-cylinder, 2.0 liter, 16 valve DOHC engine. The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which realizes optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. Thus, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.

*1: Models for Russia

*2: Models for Taiwan

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (With VVT-iE and VVT-i)
Fuel System Sequential Multiport Fuel Injection (SFI) D-4S
Displacement cm3 (cu. in.) 1987 (121.3)
Max. Output (ECC) kW@rpm 110@6600*1
127@6600*2
Max. Torque (ECC) N*m@rpm 206@4400 to 4900



b.

A25A-FKS Engine

i.

The A25A-FKS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine. The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which realizes optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

*1: Except models for Russia

*2: Models for Russia

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (With VVT-iE and VVT-i)
Fuel System Sequential Multiport Fuel Injection (SFI) D-4S
Displacement cm3 (cu. in.) 2487 (151.8)
Max. Output (EEC) kW@rpm 152@6600*1
147@6600*2
Max. Torque (EEC) N*m@rpm 243@5000



c.

2GR-FKS Engine

i.

The 2GR-FKS engine is a 3.5-liter, 24-valve DOHC V6 Direct injection 4-stroke gasoline engine Superior version (D-4S). This engine uses both direct injection and port injection systems. In addition, this engine uses the Variable Valve Timing-intelligent Wide (VVT-iW) control, Variable Valve Timing-intelligent (VVT-i) control, Direct Ignition System (DIS), and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

*1: Destination package for Brazil

*2: Models for Middle East and destination packages for Argentina and Caucasus

*3: Destination package for Latin

*4: Models for Russia

Item Specification
No. of Cyls. and Arrangement 6-cylinder, V Type
Valve Mechanism 24-valve DOHC, Chain Drive
(with VVT-iW and VVT-i)
Fuel System Sequential Multiport Fuel Injection (SFI) D-4S
Displacement cm3 (cu. in.) 3456 (210.9)
Max. Output (EEC) kW@rpm 228@6600*1
222@6600*2
224@6600*3
183@5000 to 6600*4
Max. Torque (EEC) N*m@rpm 370@4700*1
356@4700*2, *3
356@4600 to 4700*4



d.

UA80E Automatic Transaxle

i.

A UA80E 8-speed Automatic Transaxle (Direct Shift-8AT) is used on models with 2GR-FKS engine.

*: Counter gear ratio included

Transaxle Type UA80E
Gear Ratio 1st 5.519
2nd 3.184
3rd 2.050
4th 1.491
5th 1.234
6th 1.000
7th 0.800
8th 0.673
Reverse 4.220
Differential Gear Ratio* 2.561



e.

UB80E Automatic Transaxle

i.

A UB80E 8-speed Automatic Transaxle (Direct Shift-8AT) is used on models with A25A-FKS engine.

*: Counter gear ratio included

Transaxle Type UB80E
Gear Ratio 1st 5.250
2nd 3.028
3rd 1.950
4th 1.456
5th 1.220
6th 1.000
7th 0.808
8th 0.673
Reverse 4.014
Differential Gear Ratio* 2.802



f.

K120 Continuously Variable Transaxle (CVT)

i.

A K120 Continuously Variable Transaxle (CVT) is used on CVT models with the M20A-FKS engine.

Transaxle Type K120
Gear Ratio Forward 3.377
Reverse 3.136
Pulley Ratio Forward 2.236 to 0.447
Reverse -
Differential Gear Ratio 4.262



g.

Suspension

i.

A MacPherson strut type independent suspension, which has L-type lower arms is used for the front.


ii.

A double wishbone type independent suspension, which consists of an upper control arm, 2 lower suspension arms and a trailing arm is used for the rear.



h.

Steering

i.

A rack and pinion type steering gear assembly is used.


ii.

An Electric Power Steering (EPS) system is used.


iii.

A parallel rack electric power steering system with speed-sensitive function has been adopted.


iv.

A manual tilt and manual telescopic system is used.



i.

Brake

i.

A ventilated disc brake is provided for the front brake.


ii.

A solid disc brake is provided for the rear brake.


iii.

An electric parking brake system is used.


iv.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), Brake Assist, Traction Control (TRC), Vehicle Stability Control (VSC), Hill-start Assist Control, Brake Hold, VSC and Cooperative Control with EPS and Secondary Collision Brake*.

*: Models with secondary collision brake system


v.

A VSC OFF switch is used.