Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2021.02
NM33A0E _58 Vehicle Interior _068140 PRE-COLLISION _0332249 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


OPERATING CONDITION


a.

When all of the following conditions have been met, the forward recognition with heater hood sub-assembly operates.

·

The ignition switch is turned ON.

·

The outside air temperature is approximately 10°C or less.

·

A few minutes have elapsed since the forward recognition with heater hood sub-assembly operation stopped.



b.

After the forward recognition with heater hood sub-assembly operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).




CONSTRUCTION


a.

The forward recognition with heater hood sub-assembly is positioned in the forward recognition bracket. The forward recognition with heater hood sub-assembly prevents condensation on the windshield in front of the forward recognition camera.

Y206825C01
3.521,1.844 4.5,1.094 4.5,1.094 4.667,1.094 true 2.99,1.906 2.5,1.083 2.5,1.083 2.333,1.083 true 2.115,0.969 2.427,1.125 0.313,0.156 10 false *1 4.74,1.01 5.052,1.167 0.313,0.156 10 false *2
*a Sheet Heater (Heating Element) *b Temperature Fuse (Built-in parts)