Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (except 8 Sensor Type) › from 2021.02
NM33A0E _56 Audio / Visual / Telematics _067380 PARK ASSIST / MONITORING _0468688 TOYOTA PARKING ASSIST-SENSOR SYSTEM(except 8 Sensor Type) CO CONTROL F

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(except 8 Sensor Type)  CONTROL  TOYOTA PARKING ASSIST-SENSOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with parking assist monitor system

*2: Models with headup display

*3: Models with panoramic view monitor system

*4: for 6 Sensor Type

Clearance Warning ECU Assembly
·

Judges the approximate distance between the vehicle and an obstacle based on signals from the ultrasonic sensors. Output signals are sent to the combination meter assembly, rear television camera assembly*1 or headup display (meter mirror sub-assembly)*2.

·

Sounds the No. 1 clearance warning buzzer.


Front Corner Ultrasonic Sensor LH/RH Detects the distance between the vehicle and an obstacle.
Rear Corner Ultrasonic Sensor LH/RH
Rear Center Ultrasonic Sensor LH/RH*4
No. 1 Clearance Warning Buzzer Sounds to inform the driver according to the distance to the obstacle.
Combination Meter Assembly TOYOTA Parking Assist-sensor System OFF Indicator When an Toyota parking assist-sensor system is off, turns the Toyota parking assist-sensor system OFF indicator on.
Multi-information Display
·

Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.

·

Displays an indication of a malfunction or freezing of an ultrasonic sensor to inform the driver.

·

The sound volume can be chosen on the setup screen for the TOYOTA parking assist sensor system.


Master Warning Light Illuminates in accordance with the indication on the multi-information display.
Combination Meter Assembly Sends the vehicle speed signal to the clearance warning ECU assembly.
Radio and Display Receiver Assembly Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle.
Headup Display (Meter Mirror Sub-assembly)*2 Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle.
Rear Television Camera Assembly
·

Captures images of the area behind the vehicle.

·

The clearance sonar information is superimposed on the captured image. Then, the image is sent to the radio and display receiver assembly as video signals.*1


Television Camera Controller*3 The clearance sonar information is superimposed on the captured image. Then, the image is sent to the radio and display receiver assembly as video signals.
Steering Pad Switch Assembly Sends operation signals from switches to the spiral cable sub-assembly.
Spiral Cable Sub-assembly Sends operation signals from the steering pad switch assembly to the combination meter assembly.
Park/Neutral Position Switch Assembly Sends the shift position signal to the ECM.
ECM Sends the shift position signal to the clearance warning ECU assembly.
Air Conditioner Amplifier Assembly Sends outside temperature information to the clearance warning ECU assembly.
Main Body ECU (Multiplex Network Body ECU) Sends model destination signal (information to indicate the market the vehicle was built for) to the clearance warning ECU assembly.


SYSTEM CONTROL


a.

Detection Area

i.

The detection areas of the ultrasonic sensor are as shown in the following illustration.


ii.

These detection areas are applicable when positioning a 60 mm (2.36 in.) diameter pole parallel or perpendicular to the ground. The ranges vary depending on the measuring method and type of obstacle.

Corner Area
Y277006C03
1.917,4 1.833,3.667 1.833,3.667 1.667,3.667 true 5.167,3.917 5.25,3.583 5.25,3.583 5.417,3.583 true 1.417,0.51 1.729,0.667 0.313,0.156 10 false *a 2.375,2.635 2.688,2.792 0.313,0.156 10 false *b 5.615,0.771 5.927,0.927 0.313,0.156 10 false *c 1.396,3.958 1.708,4.115 0.313,0.156 10 false *d 1.521,1.625 1.833,1.781 0.313,0.156 10 false *e 5.563,3.917 5.875,4.073 0.313,0.156 10 false *f 4.75,2.573 5.083,2.813 0.333,0.24 10 false *g 0.99,4.865 1.406,5.031 0.417,0.167 10 false : *h 5.281,1.375 5.594,1.531 0.313,0.156 10 false *e 1.625,0.667 1.854,0.833 0.229,0.167 10 false A 5.438,0.885 5.667,1.052 0.229,0.167 10 false A 5.448,2.208 5.677,2.375 0.229,0.167 10 false A 1.583,2.427 1.813,2.594 0.229,0.167 10 false A 2.292,4.531 2.604,4.688 0.313,0.156 10 false *e 5.021,4.521 5.333,4.677 0.313,0.156 10 false *e 1.49,3.594 1.802,3.75 0.313,0.156 10 false *1 5.448,3.5 5.76,3.656 0.313,0.156 10 false *1
*a Approximately 650 mm (25.6 in.) *b Approximately 500 mm (19.7 in.)
*c Approximately 850 mm (33.5 in.) *d Approximately 400 mm (15.7 in.)
*e Approximately 200 mm (7.87 in.) *f Approximately 450 mm (17.7 in.)
*g Approximately 600 mm (23.6 in.) *h Detection Area


NOTICE:

The ultrasonic sensor side view detection range area (labeled*1) represents the cross section of the top view of the lines of detection range A. The area*1 does not represent the entire side view detection range.


Center Area (for 6 Sensor Type)
Y276851C01
6.073,1.438 6.385,1.594 0.313,0.156 10 false *a 5.208,2.219 5.521,2.375 0.313,0.156 10 false *b 5.177,2.698 5.49,2.854 0.313,0.156 10 false *c 4.698,2.521 5.01,2.677 0.313,0.156 10 false *d 5.771,3.844 6.083,4 0.313,0.156 10 false *e 1,4.865 1.344,5.167 0.344,0.302 10 false : *f 4.729,4.521 5.042,4.677 0.313,0.156 10 false *d
*a Approximately 1700 mm (66.9 in.) *b Approximately 1500 mm (59.1 in.)
*c Approximately 1000 mm (70.9 in.) *d Approximately 200 mm (7.87 in.)
*e Approximately 500 mm (19.7 in.) *f Detection Area




b.

The operating condition of each sensor differs according to its installed position as shown in the table below:

Installation Position Operating Condition

*: for 6 Sensor Type

Front Corner
·

Ignition switch is ON.

·

System is activated.

·

Shift lever is in a position other than P.

·

Vehicle speed is approximately 10 km/h (6 mph) or less.


Rear Corner
·

Ignition switch is ON.

·

System is activated.

·

Shift lever is in R.


Rear Center*



DIAGNOSIS


a.

If a system malfunction is detected, the clearance warning ECU assembly stores Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.