Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (for 8 Sensor Type) › from 2021.02
NM33A0E _56 Audio / Visual / Telematics _067380 PARK ASSIST / MONITORING _0468689 TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type) CO CONTROL F

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type)  CONTROL  TOYOTA PARKING ASSIST-SENSOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with panoramic view monitor system

*2: Models with headup display

Clearance Warning ECU Assembly
·

Judges the approximate distance between the vehicle and an obstacle based on signals from the ultrasonic sensors. Output signals are sent to the combination meter assembly, rear television camera assembly or television camera controller*1.

·

Sounds the No. 1 clearance warning buzzer.


Front Corner Ultrasonic Sensor LH/RH Detects the distance between the vehicle and an obstacle.
Front Center Ultrasonic Sensor LH/RH
Rear Corner Ultrasonic Sensor LH/RH
Rear Center Ultrasonic Sensor LH/RH
No. 1 Clearance Warning Buzzer Sounds to inform the driver according to the distance to the obstacle.
Combination Meter Assembly TOYOTA Parking Assist-sensor System OFF Indicator When an Toyota parking assist-sensor system is off, turns the Toyota parking assist-sensor system OFF indicator on.
Multi-information Display
·

Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.

·

Displays an indication of a malfunction or freezing of an ultrasonic sensor to inform the driver.

·

The sound volume can be chosen on the setup screen for the Toyota parking assist-sensor system.


Master Warning Light Illuminates in accordance with the indication on the combination meter assembly.
Radio and Display Receiver Assembly Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle.
Headup Display (Meter Mirror Sub-assembly)*2 Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle.
Rear Television Camera Assembly
·

Captures images of the area behind the vehicle.

·

The clearance sonar information is superimposed on the captured image. Then, the image is sent to the radio and display receiver assembly as video signals.


Television Camera Controller*1 The clearance sonar information is superimposed on the captured image. Then, the image is sent to the radio and display receiver assembly as video signals.
Steering Pad Switch Assembly Sends operation signals from switches to the spiral cable with sensor sub-assembly.
Spiral Cable Sub-assembly Sends operation signals from the steering pad switch assembly to the combination meter assembly.
Park/Neutral Position Switch Assembly Sends the shift position signal to the ECM.
ECM Sends the shift position signal to the clearance warning ECU assembly.
Brake Actuator Assembly
·

Skid Control ECU


Sends the vehicle speed signal to the clearance warning ECU assembly.
Air Conditioner Amplifier Assembly Sends outside temperature information to the clearance warning ECU assembly.
Main Body ECU (Multiplex Network Body ECU) Sends model destination signal (information to indicate the market the vehicle was built for) to the clearance warning ECU assembly.


OPERATING CONDITION


a.

When all of the conditions in the table below are established, the system performs stationary object detection.

Detection Position Operation Conditions
Front Center
·

Ignition switch is ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is not P or R.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Front Corner
·

Ignition switch is ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is not P.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Rear Corner
·

Ignition switch is ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is R.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Rear Center



SYSTEM CONTROL


a.

Detection Area

i.

The detection areas of the ultrasonic sensor are as shown in the following illustration.


ii.

These detection areas are applicable when positioning a 60 mm (2.36 in.) diameter pole parallel or perpendicular to the ground. The ranges vary depending on the measuring method and type of obstacle.

Corner Area
Y277006C04
1.76,3.635 1.885,3.635 1.885,3.635 1.948,3.979 true 5.104,3.938 5.198,3.646 5.198,3.646 5.323,3.646 true 1.406,0.479 1.719,0.635 0.313,0.156 10 false *a 5.635,0.781 5.948,0.938 0.313,0.156 10 false *c 1.396,3.958 1.708,4.115 0.313,0.156 10 false *d 2.281,4.552 2.594,4.708 0.313,0.156 10 false *e 5.563,3.917 5.875,4.073 0.313,0.156 10 false *f 1.396,4.396 1.615,4.615 0.219,0.219 10 false *g 5.531,4.427 5.844,4.583 0.313,0.156 10 false *h 0.969,4.854 1.24,5.052 0.271,0.198 10 false : *i 1.573,3.542 1.885,3.74 0.313,0.198 10 false *1 1.625,0.656 1.781,0.854 0.156,0.198 10 false A 5.438,2.198 5.594,2.396 0.156,0.198 10 false A 1.615,2.448 1.771,2.646 0.156,0.198 10 false A 5.365,3.542 5.677,3.74 0.313,0.198 10 false *1 2.375,2.646 2.688,2.802 0.313,0.156 10 false *b 4.74,2.625 5.052,2.781 0.313,0.156 10 false *b 5.25,1.385 5.563,1.542 0.313,0.156 10 false *e 5.01,4.531 5.323,4.688 0.313,0.156 10 false *e 5.417,0.896 5.573,1.094 0.156,0.198 10 false A 1.552,1.615 1.865,1.771 0.313,0.156 10 false *e
*a Approximately 800 mm (31.5 in.) *b Approximately 600 mm (23.6 in.)
*c Approximately 900 mm (35.4 in.) *d Approximately 250 mm (9.84 in.)
*e Approximately 150 mm (5.91 in.) *f Approximately 250 mm (9.84 in.)
*g Approximately 400 mm (15.7 in.) *h Approximately 400 mm (15.7 in.)
*i Detection Area - -


NOTICE:

The ultrasonic sensor side view detection range area (labeled*1) represents the cross section of the top view of the lines of detection range A. The area*1 does not represent the entire side view detection range.


Center Area
Y277007C02
0.781,1.458 1.094,1.615 0.313,0.156 10 false *a 1.698,2.729 2.01,2.885 0.313,0.156 10 false *b 2.167,2.521 2.479,2.677 0.313,0.156 10 false *f 5.177,2.208 5.458,2.458 0.281,0.25 10 false *j 5.177,2.698 5.49,2.854 0.313,0.156 10 false *c 6.094,1.438 6.406,1.594 0.313,0.156 10 false *d 1.01,3.906 1.323,4.063 0.313,0.156 10 false *e 1,4.375 1.219,4.615 0.219,0.24 10 false *g 5.781,3.875 6.094,4.031 0.313,0.156 10 false *h 5.729,4.406 6,4.615 0.271,0.208 10 false *i 0.969,4.854 1.281,5.01 0.313,0.156 10 false : *k 4.698,2.51 5.01,2.667 0.313,0.156 10 false *f 5.01,4.51 5.323,4.667 0.313,0.156 10 false *f 2.125,4.51 2.438,4.667 0.313,0.156 10 false *f
*a Approximately 1850 mm (72.8 in.) *b Approximately 1000 mm (39.4 in.)
*c Approximately 1500 mm (59.1 in.) *d Approximately 1800 mm (70.9 in.)
*e Approximately 500 mm (19.7 in.) *f Approximately 150 mm (5.91 in.)
*g Approximately 250 mm (9.84 in.) *h Approximately 650 mm (25.6 in.)
*i Approximately 250 mm (9.84 in.) *j Approximately 1500 mm (59.1 in.)
*k Detection Area - -




b.

Warning Buzzer Sounding

i.

The warning buzzer sound changes according to the distance from an identified stationary object.


ii.

The buzzer sounding interval changes approximately every 100 mm (3.94 in.) according to the distance from the stationary object.

Y272256E01
1.208,3.708 2.188,3.979 0.979,0.271 10 false Longest Range 2.396,3.698 3.104,3.917 0.708,0.219 10 false Long-range 3.302,3.719 4.198,3.99 0.896,0.271 10 false Medium-range 4.375,3.719 5.104,3.958 0.729,0.24 10 false Short-range 5.26,3.708 6.302,3.958 1.042,0.25 10 false Shortest Range 1.844,5.479 3.708,5.896 1.865,0.417 10 false Buzzer Sound Changes Every 100 mm (3.94 in.) 4.74,5.458 5.896,5.677 1.156,0.219 10 false Continuous Sound

Identification Level Detection Distance [mm (in.)] Buzzer Sound

*1: Front center sensor detection only

*2: Rear center sensor detection only

Longest Range 1000 (39.4) - 600 (23.6)*1
1500 (59.1) - 600 (23.6)*2
The sound interval changes every 100 mm (3.94 in.), and then sounds intermittently.
Long-range 600 (23.6) - 450 (17.7)
Medium-range 450 (17.7) - 300 (11.8)
Short-range 300 (11.8) - 150 (5.91) Sounds consecutively.
Shortest Range 150 (5.91) or less


iii.

If sensors detect multiple stationary objects, the buzzer sounds according to the distance from the closest stationary object.

HINT:

The TOYOTA parking assist-sensor warning buzzer does not sound if the RCTA warning buzzer is sounding.





FUNCTION


a.

TOYOTA Parking Assist-sensor Operation

i.

The combination meter assembly customization setting can be used to turn the Toyota parking assist-sensor system on and off.


ii.

An Toyota parking assist-sensor system off indicator is located in the combination meter assembly to make it possible to check that the Toyota parking assist-sensor system is off.



b.

Warning Buzzer Mute Function (Models with Parking Support Brake System)

i.

When the warning buzzer is sounding, it is automatically muted if any of the following conditions are established.

·

There is no change to the distance from the stationary object over a certain period of time.

·

The distance between the vehicle and stationary object increases.

·

The stationary object is removed from the path.



ii.

When the warning buzzer has been automatically muted, it once again begins sounding if any of the following conditions are established.

·

A stationary object is detected within short-range.

·

The vehicle approaches a stationary object.

·

A stationary object that was out of the path of the vehicle is now on the path of the vehicle.



iii.

When the warning buzzer is sounding, the warning buzzer is temporarily muted if the steering pad switch assembly is used to do so.


iv.

When the warning buzzer has been temporarily muted, temporary muting is canceled if any of the following conditions are established.

·

The shift status is changed.

·

The vehicle speed reaches a certain value or higher.

·

There is a sensor abnormality (open/frozen).

·

It cannot be used (CAN communication abnormality).

·

The Toyota parking assist-sensor system was turned off.

·

The ignition switch was turned off.




c.

Abnormality Judgment

i.

When the Toyota parking assist-sensor system is turned on, abnormality judgment is performed on all sensors regardless of the shift position.


ii.

If there is an open or frozen sensor, or if there is a communication malfunction in the clearance warning ECU assembly, an Toyota parking assist-sensor system off indicator illuminates and a warning is displayed on the multi-information display.



d.

TOYOTA Parking Assist-sensor System Settings

i.

The combination meter assembly customization setting can be used to change the volume of the buzzer (3 levels).


ii.

The GTS can be connected to change settings for some functions as desired by the user. Refer to the Repair Manual for details.




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the GTS. Refer to the Repair Manual for details.