Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2021.02
NM33A0E _56 Audio / Visual / Telematics _068076 AUDIO / VIDEO _0333911 AUDIO AND VISUAL SYSTEM CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CONTROL  AUDIO CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: w/ Stereo Component Amplifier Assembly

*2: w/o Stereo Component Amplifier Assembly

*3: w/ Telematics Transceiver

*4: w/ Headup Display System

*5: w/ Navigation Antenna Assembly

*6: w/ DAB Function

*7: w/ Cooler Control Switch Assembly

Radio and Display Receiver Assembly
·

Outputs the audio signal of the selected audio source to the stereo component amplifier assembly.*1

·

Outputs the audio signal of the selected audio source to the speakers.*2

·

Sends each sound source and hands-free system status to the combination meter.


Speakers Output the audio sounds.
Stereo Component Amplifier Assembly*1 Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers.
Window Glass Antenna Wire
·

AM

·

FM Main

·

FM Sub

·

DAB*6


·

Receives AM/FM radio broadcasts via the rear window glass antenna printed antenna array. (AM/FM)

·

Receives digital audio broadcasts via the rear window glass antenna printed antenna array. (DAB)*6


No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly.
No. 2 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly.
Telematics Transceiver*3 Transmits and receives data from the data center.
Navigation Antenna Assembly*5
·

GPS


Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly.
Roof Antenna Assembly*3
·

GPS


Digital Audio Broadcasting Antenna Assembly*6 Amplifies digital audio broadcasts signals from the DAB antenna and sends them to the radio and display receiver assembly.
Steering Pad Switch Assembly Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly.
Cooler Control Switch Assembly*7 Sends operation signals from switches such as the channel up/down switch, tune up/down switch, volume up/down switch, power switch and mode switch operation to the radio and display receiver assembly.
Telephone Microphone Assembly
·

Detects voice during hands-free conversations and voice commands.

·

Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly.


No. 1 Stereo Jack Adapter Assembly
·

When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB.


Combination Meter Assembly
·

Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication.

·

Sends the vehicle speed signal to the radio and display receiver assembly.


Meter Mirror Sub-assembly*4 Displays various information on the head up display sent from the radio and display receiver assembly via local bus communication.
Skid Control ECU (Brake Actuator Assembly) Sends the parking brake position signal to the radio and display receiver assembly.
Instrument Panel Junction Block Assembly
·

BKUP LP Relay


Sends the R shift position signal to the radio and display receiver assembly.


DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.