Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › from 2021.02
NM33A0E _59 Vehicle Exterior _068184 EXTERIOR PANELS / TRIM _0332942 BODY STRUCTURE GE GENERAL F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  GENERAL  GENERAL  


OUTLINE


a.

Lightweight and Highly Rigid Body

i.

Using Hot-stamped sheet steel, high-strength sheet steel, ultra high-strength sheet steel, and extensive aluminum component both reduces weight and ensures rigidity together with an optimized frame joint structure and optimal positioning of reinforcement members.



b.

Safety Features

i.

The body a structure that can distribute energy to many members to increase absorption of the collision energy and a high strength framework that can control the deformation of the cabin and help secure sufficient survival space.


ii.

The impact energy-absorbing construction have been adopted in consideration of pedestrian protection.



c.

Rust-resistant Body

i.

Rust-resistance performance is enhanced due to extensive use of anti-corrosion sheet steel, as well as by anti-corrosion treatment that includes the application of anti-rust wax, sealer and anti-chipping paint to easily corroded parts such as the rocker panels.



d.

Low Vibration and Low Noise Body

i.

Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.


ii.

By connecting braces and reinforcements to the body panels, panel vibration has been reduced. Changes in the structure of body panels reduces panel vibration. A body structure which reduces body panel frame movement ensures low noise levels.



e.

Aerodynamics

i.

Leveling off the surface where the front body pillar meets the windshield and smoothing the shape around the doors, front and rear bumper are effective in reducing flow separation.


ii.

Various types of airflow routing parts are control airflow are provided under the floor, and an under cover is provided to make the under body flat in order to ensure excellent aerodynamic performance.




MAIN FEATURES


a.

Overall front

i.

The solid center volume extending from the hood to the bumper (*a) is interlocked by the bumper corner volumes (*b), expressing a low and wide, bold front area.

Y271007E03
1.302,5.406 1.615,5.604 0.313,0.198 10 false *a 2.74,1.615 3.052,1.813 0.313,0.198 10 false *a 4.802,2.177 5.115,2.375 0.313,0.198 10 false *b 3,6.063 3.313,6.26 0.313,0.198 10 false *b 0.156,5.729 0.469,5.927 0.313,0.198 10 false *b 0.656,2.156 0.969,2.354 0.313,0.198 10 false *b



b.

Lower grille

i.

Lower grille bars extend dynamically to the sides, creating a refined impression worthy of the LE model.

Y271008



c.

Overall front (Sporty Grade)

i.

The side pontoons (*a) have been enlarged using a resin overlay without changing the bumper, further emphasizing the sportiness.


ii.

The side fins are strongly flared outwards (*b), and the under spoiler extends fully across the width (*c), differentiating from the current model impression while further emphasizing the wide and low stance.

Y271009E03
4.208,2.563 4.917,1.833 4.917,1.833 5.083,1.833 true 1.406,2.552 0.667,1.833 0.667,1.833 0.5,1.833 true 3.75,7.417 3.583,7.417 3.583,7.417 3.344,6.75 true 1.917,7.333 2.083,7.333 2.083,7.333 2.5,6.833 true 2.854,6.479 3.167,6.167 3.167,6.167 3.333,6.167 true 5.146,1.74 5.375,1.958 0.229,0.219 10 false *a 0.313,1.74 0.542,1.958 0.229,0.219 10 false *a 4.833,3.083 5.083,3.344 0.25,0.26 10 false *b 0.604,3.073 0.854,3.333 0.25,0.26 10 false *b 2.698,3.073 2.948,3.333 0.25,0.26 10 false *c 3.385,6.063 3.615,6.281 0.229,0.219 10 true *a 1.74,7.24 1.99,7.5 0.25,0.26 10 false *c 3.813,7.333 4.063,7.594 0.25,0.26 10 false *b



d.

Lower grille (Sporty Grade)

i.

Changed to sporty honeycomb type.


ii.

By unifying the mesh pattern, a cohesive front face is expressed.

Y271010