Home › Engine / Hybrid System › 2AR-FE (ENGINE CONTROL) › MASS AIR FLOW METER › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065323 2AR-FE ENGINE CONTROL _0319009 MASS AIR FLOW METER A

2AR-FE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

NOTICE:
·

If the mass air flow meter sub-assembly has been struck or dropped, replace it.

·

If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.




b.

Connect the mass air flow meter sub-assembly connector.


Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION