89422
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION
Install a new gasket to the engine coolant temperature sensor.
Using SST, install the engine coolant temperature sensor to the cylinder head sub-assembly.
If the engine coolant temperature sensor has been struck or dropped, replace it.
Connect the engine coolant temperature sensor connector.
17705
2.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
12601B
3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
4.ADD ENGINE COOLANT
5.INSPECT FOR COOLANT LEAK
6.PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION