Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for A25A-FKS)
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0319110 COMPRESSOR(for A25A-FKS) A

HEATING / AIR CONDITIONING  COMPRESSOR(for A25A-FKS)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 16361A 2.REMOVE V-RIBBED BELT

Hide 53295E 3.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 4.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 16281F 5.DISCONNECT NO. 5 WATER BY-PASS HOSE

Hide 88711 6.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE SUB-ASSEMBLY

a.
E365910

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose sub-assembly from the compressor assembly with pulley.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88704 7.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E365911

Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88310 8.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

a.
E366969

Disconnect the connector.


b.
E365912

Disconnect the connector.


c.

for Type A:

i.
E365913C01
0,0 0,0 false
V100135

Bolt
V100136

Nut


Remove the 2 bolts and 2 nuts.


ii.
E365914

Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.



d.

for Type B:

i.
E371401

Remove the 4 bolts and compressor assembly with pulley.