78111
1.REMOVE ACCELERATOR PEDAL (for LHD)
for 2AR-FE:
Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>ACCELERATOR PEDAL>REMOVAL
for A25A-FKS:
Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>ACCELERATOR PEDAL>REMOVAL
for 2GR-FKS:
Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>ACCELERATOR PEDAL>REMOVAL
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
88650N
3.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
for LHD:
Disengage each clamp.
Remove the screw.
|
Remove in this Direction |
Disengage the guide as shown in the illustration.
for RHD:
Remove the front floor carpet clip.
Turn back the front floor carpet assembly as shown in the illustration.
Remove the screw.
|
Remove in this Direction |
Disengage the guide as shown in the illustration.
| *A | w/o Seat Heater |
| *B | w/ Seat Heater |
Disconnect each connector to remove the air conditioning amplifier assembly.