Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for LHD)
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0319132 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  DISASSEMBLY  


PROCEDURE

Hide 47210U 1.REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN

a.

Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C373418

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



Hide 47220D 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Remove the brake master cylinder reservoir assembly from the brake master cylinder body.


Hide 47255 3.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C372735

Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.


b.

Remove the brake master cylinder body from the vise.


Hide 47230 4.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47299 5.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER