Home › Engine / Hybrid System › A25A-FKS (FUEL) › FUEL PUMP (w/ Canister Pump Module)
RM33A0E _51 Engine / Hybrid System _065343 A25A-FKS FUEL _0319398 FUEL PUMP(w/ Canister Pump Module) A

A25A-FKS FUEL  FUEL PUMP(w/ Canister Pump Module)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A401638C01
0.906,1.792 1.073,1.792 1.073,1.792 1.531,1.385 true 0.74,1.698 1.052,1.854 0.313,0.156 10 false *a
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 23221 2.REMOVE FUEL PUMP

a.
A401709

Remove the harness protector from the fuel pump harness.


b.
A401710

Disconnect the 2 fuel pump harness connectors.


c.

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.

NOTICE:

Do not damage the wire harness.



d.
A401690

Disengage the clamp to disconnect the tube from the fuel filter.


e.
A401691C01
0.458,1.292 0.656,1.292 0.656,1.292 0.958,0.74 true 0.292,1.198 0.604,1.354 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws.


f.
A401831C01
0.677,1.573 1.042,1.573 1.042,1.573 1.313,1.292 true 0.51,1.49 0.823,1.646 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, separate the fuel filter from the fuel sub-tank.

NOTICE:
·

Do not damage the fuel sub-tank and fuel filter.

·

Pull out the fuel filter carefully because the O-ring is firmly installed between the fuel filter and fuel sub-tank.

·

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION




g.
A401692

Remove the O-ring from the fuel sub-tank.


h.
A401711

Disengage the claw to disconnect the fuel pump harness from the fuel pump.


i.
A401712C01
0.927,0.99 1.198,0.99 false 0.917,1.823 1.188,1.823 false 1.354,2.094 1.469,2.094 1.469,2.094 1.635,1.708 true 0.76,0.896 1.073,1.052 0.313,0.156 10 false *a 0.75,1.74 1.063,1.896 0.313,0.156 10 false *b 1.188,2 1.5,2.156 0.313,0.156 10 false *c
*a Fuel Filter
*b Suction Filter
*c Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws, and remove the fuel pump from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or suction filter.

·

Do not remove the suction filter from the fuel pump.




j.
A401713

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump.


k.
A401714C01
2.521,0.667 2.667,0.469 2.667,0.469 2.781,0.469 false 2.531,0.813 2.781,0.813 false 0.656,4.104 0.958,4.104 false 2.833,0.396 3.146,0.552 0.313,0.156 10 false *1 2.833,0.74 3.146,0.896 0.313,0.156 10 false *2 2.156,1.927 2.469,2.083 0.313,0.156 10 false *a 2.24,2.5 2.552,2.656 0.313,0.156 10 false *a 1,4.042 1.313,4.198 0.313,0.156 10 false *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.