Home › Engine / Hybrid System › 2GR-FKS (FUEL) › FUEL INJECTOR (for Direct Injection)
RM33A0E _51 Engine / Hybrid System _065334 2GR-FKS FUEL _0319415 FUEL INJECTOR(for Direct Injection) G

2GR-FKS FUEL  FUEL INJECTOR(for Direct Injection)  INSPECTION  


PROCEDURE

Hide 23250 1.INSPECT FUEL INJECTOR ASSEMBLY

NOTICE:

This inspection is for checking the fuel injector assembly for an open or short. Because the fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.


a.
A333795C01
0.156,0.115 0.469,0.271 0.313,0.156 10 false *a
*a Component without harness connected
(Fuel Injector Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.74 to 2.04 Ω


If the result is not as specified, replace the fuel injector assembly.