Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM33A0E _52 Drivetrain _065351 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0319442 SHIFT LEVER KNOB A

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C370816

Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.


b.
C370817C01
0.833,1.458 1.021,1.26 1.021,1.26 1.115,1.26 true 1.875,1.771 2,1.771 2,1.771 2.24,1.313 true 1.156,1.156 1.469,1.313 0.313,0.156 10 false *a 1.635,1.656 1.833,1.844 0.198,0.188 10 true *b
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.