Home › Engine / Hybrid System › 2AR-FE (COOLING) › COOLING FAN SYSTEM › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065328 2AR-FE COOLING _0319468 COOLING FAN SYSTEM G

2AR-FE COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

CAUTION:
A345225

To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fan when inspecting the cooling fan system.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Electric Cooling Fan.

Powertrain > Engine and ECT > Active Test
Tester Display
Control the Electric Cooling Fan
50004 234 16

e.

Check the operation of the cooling fan while operating it using the GTS.

If the cooling fan motor (fan with motor assembly) does not operate, check the cooling fan circuit.

Click hereEngine / Hybrid System>2AR-FE (COOLING)>COOLING FAN SYSTEM>Cooling Fan Circuit