Home › Engine / Hybrid System › 2AR-FE (COOLING) › THERMOSTAT › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065328 2AR-FE COOLING _0319475 THERMOSTAT A

2AR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A406822C01
1.74,0.896 2.51,0.896 false 2.552,0.802 2.865,0.958 0.313,0.156 10 true *a 1.396,0.219 1.635,0.406 0.24,0.188 10 true *b 1.792,0.219 2.031,0.406 0.24,0.188 10 true *b
*a Jiggle Valve
*b 10°


Install the thermostat to the water inlet housing.

NOTICE:

The jiggle valve may be set within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 5.ADD ENGINE COOLANT