Home › Engine / Hybrid System › A25A-FKS (COOLING) › COOLING FAN SYSTEM › 2017.09–2017.12
RM33A0E _51 Engine / Hybrid System _065346 A25A-FKS COOLING _0319569 COOLING FAN SYSTEM G

A25A-FKS COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

CAUTION:
A345225

To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fan when inspecting the cooling fan system.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the Engine Cooling Fan Duty Ratio.

Powertrain > Engine > Active Test
Tester Display
Control the Engine Cooling Fan Duty Ratio
50004 372 11

e.

Check the operation of the cooling fan while operating it using the GTS.

OK:
Active Test Operation Fan Operation
30 - 100% Cooling fan operates
0% Cooling fan stops


If the cooling fan motor (fan with motor assembly) does not operate, check the cooling fan circuit.

Click hereEngine / Hybrid System>A25A-FKS (COOLING)>COOLING FAN SYSTEM>Cooling Fan Circuit