Home › Engine / Hybrid System › A25A-FKS (COOLING) › FLOW SHUTTING VALVE (for ATF)
RM33A0E _51 Engine / Hybrid System _065346 A25A-FKS COOLING _0319573 FLOW SHUTTING VALVE(for ATF) G

A25A-FKS COOLING  FLOW SHUTTING VALVE(for ATF)  INSPECTION  


PROCEDURE

Hide 16261G 1.INSPECT FLOW SHUTTING VALVE (NO. 1 WATER BY-PASS HOSE)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 22 to 28 Ω


If the result is not as specified, replace the flow shutting valve (No. 1 water by-pass hose).