Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM33A0E _53 Suspension _065361 FRONT SUSPENSION _0319581 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

CAUTION:
C320205

·

Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

·

Always wear safety glasses.



HINT:

The gas is colorless, odorless and non-poisonous.


a.
C388460N01
0.313,0.292 0.469,0.49 0.156,0.198 10 false A 0.938,0.292 1.094,0.49 0.156,0.198 10 false B 1.635,0.292 1.792,0.49 0.156,0.198 10 false C 2.417,0.292 2.573,0.49 0.156,0.198 10 false D

Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole of around 4 mm depth between (A) and (B) shown in the illustration to expose the hollow core.

HINT:

Some front shock absorbers do not have a hollow core, but it is necessary to perform this step as a precaution.



b.

Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole between (C) and (D) shown in the illustration to discharge the gas inside.