When installing the name plates or luggage compartment door emblem, heat the luggage compartment door panel and name plates or luggage compartment door emblem using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Name Plate or Luggage Compartment Door Emblem | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door panel, name plates or luggage compartment door emblem excessively.
75442
1.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 10 pins and install the No. 2 luggage compartment door name plate as shown in the illustration.
Press the No. 2 luggage compartment door name plate firmly to install it.
75431
2.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
Press the luggage compartment door emblem firmly to install it.
75443A
3.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 3 luggage compartment door plate.
Remove the release paper from the No. 3 luggage compartment door plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 3 luggage compartment door plate as shown in the illustration.
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 20.4 mm (0.803 in.) | B | 19.5 mm (0.768 in.) |
| C | 10.6 mm (0.417 in.) | - | - |
Press the No. 3 luggage compartment door plate firmly to install it.
75447
4.INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 7 luggage compartment door name plate.
Remove the release paper from the No. 7 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 7 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 8.7 mm (0.343 in.) | B | 13.9 mm (0.547 in.) |
| C | 24.1 mm (0.949 in.) | - | - |
Press the No. 7 luggage compartment door name plate firmly to install it.