Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › OIL PUMP
RM33A0E _51 Engine / Hybrid System _065347 A25A-FKS LUBRICATION _0319751 OIL PUMP G

A25A-FKS LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 1.INSPECT OIL PUMP RELIEF VALVE

a.
A402212

Coat the oil pump relief valve with engine oil, then check that it falls smoothly into the valve hole by its own weight.

HINT:

If the oil pump relief valve does not fall smoothly, replace the oil pump assembly.



Hide 2.INSPECT OIL PUMP ROTOR

a.

Check the side clearance (Oil pump driven rotor side).

i.
A404814C01
1.031,0.719 1.302,0.719 false 0.531,1.865 0.802,1.865 false 2.208,1.563 2.448,1.375 2.448,1.375 2.615,1.375 false 0.833,0.615 1.146,0.813 0.313,0.198 10 false *1 0.354,1.771 0.667,1.969 0.313,0.198 10 false *2 2.49,0.552 2.802,0.75 0.313,0.198 10 false *a 2.073,2.063 2.313,2.26 0.24,0.198 10 true *b 2.667,1.271 2.906,1.469 0.24,0.198 10 false *c
*1 Oil Pump Driven Rotor
*2 Oil Pump Body
*a Width
*b Depth
*c Straightedge


Using a vernier caliper, measure the width of the oil pump driven rotor.

HINT:

Perform the measurement at 3 random places.



ii.

Using a vernier caliper and precision straightedge, measure the depth of the oil pump body.

NOTICE:

Make sure to deduct the thickness of the precision straightedge.


HINT:

Perform the measurement at 3 random places.



iii.

Subtract the oil pump driven rotor width measurement from the oil pump body depth measurement.

Standard Side Clearance:

0.025 to 0.070 mm (0.000984 to 0.00276 in.)


HINT:

If the result is not as specified, replace the oil pump assembly.




b.

Check the side clearance (Oil pump regulator ring side).

i.
A404815C01
0.865,0.917 1.115,0.917 false 0.594,1.813 0.844,1.813 false 2.229,1.583 2.479,1.583 false 0.698,0.833 1.01,1.031 0.313,0.198 10 false *1 0.406,1.719 0.719,1.917 0.313,0.198 10 false *2 2.625,0.906 2.938,1.104 0.313,0.198 10 false *a 2.063,2.052 2.323,2.26 0.26,0.208 10 true *b 2.552,1.479 2.813,1.688 0.26,0.208 10 false *c
*1 Oil Pump Regulator Ring
*2 Oil Pump Body
*a Width
*b Depth
*c Straightedge


Using a vernier caliper, measure the width of the oil pump regulator ring.

HINT:

Perform the measurement at 3 random places.



ii.

Using a vernier caliper and precision straightedge, measure the depth of the oil pump body.

NOTICE:

Make sure to deduct the thickness of the precision straightedge.


HINT:

Perform the measurement at 3 random places.



iii.

Subtract the oil pump regulator ring width measurement from the oil pump body depth measurement.

Standard Side Clearance:

0.025 to 0.075 mm (0.000984 to 0.00295 in.)


HINT:

If the result is not as specified, replace the oil pump assembly.