Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM33A0E _59 Vehicle Exterior _065394 WIPER / WASHER _0320457 WIPER AND WASHER SYSTEM D

WIPER / WASHER  WIPER AND WASHER SYSTEM  CHECK FOR INTERMITTENT PROBLEMS  


NOTICE:
·

If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read and saved, the operation history information could be lost.

·

The Operation History function uses the current system time of the GTS and the time counter inside the controlling ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure that the GTS system clock is accurately set to the current time.



CHECK OPERATION HISTORY


HINT:

The windshield wiper motor assembly records the wiper and washer system operation history, which can be read using the GTS.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Wiper / Utility / Operation History.

Body Electrical > Wiper > Utility
Tester Display
Operation History
50005 384 1052

e.

Following the instructions on the screen, read and save the Operation History.

Tester Display
Motor Lock Detection
Temperature Protection Detection
Overvoltage Detection
Low Voltage Detection