1.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY
35370
2.REMOVE STATOR SHAFT ASSEMBLY
Using a T30 "TORX" socket wrench, remove the 16 bolts and stator shaft assembly from the front oil pump body sub-assembly.
Keep the gears in the order they were removed.
3.INSPECT CLEARANCE OF FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY
35321
4.REMOVE FRONT OIL PUMP DRIVE GEAR
Remove the front oil pump drive gear from the front oil pump body sub-assembly.
35322
5.REMOVE FRONT OIL PUMP DRIVEN GEAR
Remove the front oil pump driven gear from the front oil pump body sub-assembly.
35301B
6.REMOVE FRONT OIL PUMP BODY O-RING
Remove the front pump body O-ring from the front oil pump body sub-assembly.
35301A
7.REMOVE FRONT OIL PUMP OIL SEAL
Mount the front oil pump body sub-assembly in a vise between aluminum plates.
Do not overtighten the vise.
Using SST, remove the front oil pump oil seal from the front oil pump body sub-assembly.